Advanced Screen; Cpu Configuration - ASROCK G31M-VS - VIA User Manual

3.4 Advanced Screen

3.4 3.4 3.4 3.4 Advanced Screen Advanced Screen Advanced Screen Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP
Configuration, SuperIO Configuration, and USB Configuration.
Main Smart Advanced
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.

CPU Configuration

Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
SuperIO Configuration
USB Configuration
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
3.4.1 CPU Configuration 3.4.1 3.4.1 CPU Configuration CPU Configuration CPU Configuration
3.4.1 3.4.1 CPU Configuration
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Spread Spectrum
Ratio Status
Ratio Actual Value
Ratio CMOS Setting
Intel (R) Virtualization tech.
CPU Thermal Throttling
No-Excute Memory Protection
Hyper Threading Technology
Intel (R) SpeedStep(tm) tech.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configuration
options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
2 8 2 8 2 8
2 8 2 8
BIOS SETUP UTILITY
H/W Monitor Boot Security
Options for CPU
Enter Go to Sub Screen
F1
F9
F10
ESC
BIOS SETUP UTILITY
Select the over clock
mode.
[Auto]
[200]
[100]
[Enabled]
[Auto]
Unlocked (Min: 12, Max: 14)
14
[14]
[Enabled]
+- +-
[Enabled]
F1 F1
[Disabled]
F9 F9
[Enabled]
F10 F10
[Auto]
ESC ESC
Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit
Select Screen Select Screen
Select Item Select Item
Change Option Change Option
General Help General Help
Load Defaults Load Defaults
Save and Exit Save and Exit
Exit Exit