Installation Of Memory Modules (Dimm) - ASROCK CONROE1333-DVI-H - INSTALLATION 04-2007 Installation Manual

Hide thumbs Also See for CONROE1333-DVI-H - INSTALLATION 04-2007:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

2.3 Installation of Memory Modules (DIMM)

2.3 Installation of Memory Modules (DIMM)
2.3 Installation of Memory Modules (DIMM)
2.3 Installation of Memory Modules (DIMM)
2.3 Installation of Memory Modules (DIMM)
ConRoe1333-DVI/H motherboard provides four 240-pin DDRII (Double Data
Rate II) DIMM slots, and supports Dual Channel Memory Technology. For dual
channel configuration, you always need to install identical (the same brand,
speed, size and chip-type) DDRII DIMM pair in the slots of the same color. In other
words, you have to install identical DDRII DIMM pair in Dual Channel A (DDRII_1
and DDRII_3; Yellow slots; see p.2 No.7) or identical DDRII DIMM pair in Dual
Channel B (DDRII_2 and DDRII_4; Orange slots; see p.2 No.8), so that Dual
Channel Memory Technology can be activated. This motherboard also allows
you to install four DDRII DIMMs for dual channel configuration, and please install
identical DDRII DIMMs in all four slots. You may refer to the Dual Channel
Memory Configuration Table below.
Dual Channel Memory Configurations
(DS: Double Side, SS: Single Side)
2 memory modules SS
2 memory modules DS
2 memory modules X
2 memory modules X
4 memory modules SS
1.
If you want to install two memory modules, for optimal compatibility
and reliability, it is recommended to install them in the slots of the
same color. In other words, install them either in the set of yellow
slots (DDRII_1 and DDRII_3), or in the set of orange slots (DDRII_2
and DDRII_4).
2.
If only one memory module or three memory modules are installed
in the DDRII DIMM slots on this motherboard, it is unable to activate
the Dual Channel Memory Technology.
3.
If a pair of memory modules is NOT installed in the same Dual
Channel, for example, installing a pair of memory modules in DDRII_1
and DDRII_2, it is unable to activate the Dual Channel Memory
Technology .
4.
It is not allowed to install a DDR memory module into DDRII slot;
otherwise, this motherboard and DIMM may be damaged.
1 2
1 2
1 2
1 2
1 2
ASRock ConRoe1333-DVI/H Motherboard
DDRII_1
DDRII_2
(Yellow Slot) (Orange Slot) (Yellow Slot) (Orange Slot)
X
X
SS
DS
SS
DDRII_3
DDRII_4
SS
X
DS
X
X
SS
X
DS
SS
SS

Advertisement

Table of Contents
loading

Table of Contents