Without Raid Functions; Functions; Tm Tm - ASROCK A780GXH 128M - V1.1 User Manual

NOTE1. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
NOTE2. Currently, if you install Windows
and there are no SATA / SATAII device used, please set up "SATA Operation Mode"
to [IDE] in BIOS.
2 . 1 7 2 . 1 7 Installing Windows 2 . 1 7 2 . 1 7 2 . 1 7 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista 64-bit W 64-bit W
Vista Vista Vista 64-bit W 64-bit W 64-bit Without RAID F
TM TM TM TM TM
If you want to install Windows
Vista TM 64-bit OS on your SATA / SATAII HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.17.1 Installing Windows 2.17.1 Installing Windows 2.17.1 Installing Windows
2.17.1 Installing Windows 2.17.1 Installing Windows
F F F F Functions unctions unctions
unctions unctions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Make a SATA / SATAII driver diskette.
Make a SATA / SATAII driver diskette by following section 2.16.1 step 2 on page 40.
STEP 3: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [AHCI].
®
STEP 4: Install Windows
You can start to install Windows
beginning of Windows ® setup, press F6 to install a third-party AHCI driver. When prompted,
insert the SATA / SATAII driver diskette containing the AMD AHCI driver. After reading the
floppy disk, the driver will be presented. Select the driver to install according to the OS
you install. (Select "AMD AHCI Compatible RAID Controller-x86 platform" for Windows
XP, or "AMD AHCI Compatible RAID Controller-x64 platform" for Windows
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows ®
® Vista TM / Windows ® Vista TM
® TM
Vista / Windows
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
® ® ® ® ®
ithout RAID F ithout RAID F unctions unctions
ithout RAID F ithout RAID Functions unctions unctions
® ®
XP, Windows XP 64-bit, Windows
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ® ® ® ® XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ®
XP or Windows XP 64-bit on your SATA / SATAII HDDs
Advanced screen
Advanced screen
®
XP / Windows XP 64-bit OS on your system.
® XP / Windows ® XP 64-bit OS on your system. At the
Advanced screen
XP / Windows ® XP 64-bit OS on your system.
4 2 4 2 4 2 4 2 4 2
64-bit on IDE HDDs and want to
® TM
Vista 64-bit on IDE HDDs
/ / / / /
TM TM TM
TM TM
® TM
Vista or Windows
IDE Configuration.
IDE Configuration.
® XP 64-bit.)
IDE Configuration.
®
®