Chipset Configuration - ASROCK 890GX EXTREME3 User Manual

3.4.2 3.4.2 3.4.2

Chipset Configuration

Chipset Configuration Chipset Configuration
3.4.2 3.4.2 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
Onboard HD Audio
Front Panel
OnBoard Lan
Dr. LAN
Link speed : 10Mbps
Onboard IEEE 1394
Primary Graphics Adapter
Internal Graphics Mode
UMA Frame Buffer Size
Onboard HDMI HD Audio
Surround View
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If
you select [Auto], the onboard HD Audio will be disabled when PCI Sound
Card is plugged.
Front Panel
Select [Auto] or [Disabled] for the onboard HD Audio Front Panel.
OnBoard Lan
This allows you to enable or disable the onboard Lan feature.
Dr. LAN
This allows you to select "LAN Cable Detection" function.
Onboard IEEE 1394
This allows you to enable or disable the "Onboard IEEE 1394" feature.
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple
video controllers. The default value of this feature is [PCI]. Configuration
options: [Onboard], [PCI] and [PCI Express].
Internal Graphics Mode
This allows you to adjust internal graphics mode. The default value is
[UMA+SIDEPORT]. Configuration options: [UMA], [SIDEPORT] and
[UMA+SIDEPORT].
UMA Frame Buffer Size
This allows you to set UMA frame buffer size. The default value is [Auto].
Configuration options: [Auto], [32MB], [64MB], [128MB], [256MB] and
[512MB]. This option only appears when you set "Internal Graphics Mode"
to [UMA] or [UMA+SIDEPORT].
Auto/Enable/Disable
Onboard HD Audio.
[Auto]
[Auto]
[Enabled]
[Enabled]
[PCI]
Select Screen
[UMA+SIDEPORT]
Select Item
[Auto]
+ - Change Option
[Enabled]
F1 General Help
[Disabled]
F9 Load Defaults
F10 Save and Exit
ESC Exit
6 0 6 0 6 0 6 0 6 0