ASROCK 880GM PRO3 Manual
Hide thumbs Also See for 880GM PRO3:

Advertisement

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2011 ASRock INC. All rights reserved.
ASRock
Published January 2011
880GM Pro3
Motherboard
1 1 1 1 1

Advertisement

Table of Contents
loading

Summary of Contents for ASROCK 880GM PRO3

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Page 2: Motherboard Layout

    (HD_AUDIO1, White) USB 2.0 Header (USB10_11, Blue) PCI Slots (PCI1-2) SPI Flash Memory (32Mb) PCI Express 2.0 x16 Slot (PCIE2; Blue) Southbridge Controller PCI Express 2.0 x1 Slot (PCIE1; White) SATA3 Connector (SATA3_5 (PORT 4), White) Power Fan Connector (PWR_FAN1)
  • Page 3 Optical SPDIF Out Port VGA/DVI-D Port Line In (Light Blue) PS/2 Keyboard Port (Purple) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK...
  • Page 4 To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click “ok”.
  • Page 5: Package Contents

    ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.
  • Page 6: Specifications

    - Support for Socket AM3+ processors - Support for Socket AM3 processors: AMD Phenom II X6 / X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 / Sempron processors - 8-Core CPU Ready...
  • Page 7 - 4 x Ready-to-Use USB 2.0 Ports - 1 x eSATA3 Connector - 2 x Ready-to-Use USB 3.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - 1 x IEEE 1394 Port - HD Audio Jack: Rear Speaker/Central/Bass/Line in/...
  • Page 8 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Page 9 CAUTION! ASRock UCC (Unlock CPU Core) feature simplifies AMD CPU activation. As long as a simple switch of the UEFI option “ASRock UCC”, you can unlock the extra CPU core to enjoy an instant performance boost. When UCC feature is...
  • Page 10 ASRock AIWI is the world's first utility to turn your iPhone/iPod touch as a game joystick to control your PC games. All you have to do is just to install the ASRock AIWI utility either from ASRock official website or ASRock software support CD to your motherboard, and also download the free AIWI Lite from App store to your iPhone/iPod touch.
  • Page 11 CPU. 15. While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.
  • Page 12: Pre-Installation Precautions

    Installation Installation Installation This is a Micro ATX form factor (9.6-in x 9.6-in, 24.4 cm x 24.4 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to en- sure that the motherboard fits into it. Pre-installation Precautions...
  • Page 13: Installation Of Cpu Fan And Heatsink

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
  • Page 14: Installation Of Memory Modules (Dimm)

    (the same brand, speed, size and chip- type) DDR3 DIMM pair in the slots of the same color. In other words, you have to install identical DDR3 DIMM pair in Dual Channel A (DDR3_A1 and DDR3_B1;...
  • Page 15: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 16: Expansion Slots (Pci And Pci Express Slots)

    2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE Slots: PCIE1 (PCIE x1 slot;...
  • Page 17: Dual Monitor And Surround Display Features

    VGA card to this motherboard. This motherboard also provides independent display controllers for DVI-D, D-Sub and HDMI to support dual VGA output so that DVI-D, D-sub and HDMI can drive same or different display contents.
  • Page 18 [512MB] to enable the function of VGA/D-sub. Please make sure that the value you select is less than the total capability of the system memory. If you do not adjust the UEFI setup, the default value of “Share Memory”, [Auto], will disable VGA/D-Sub function when the add-on VGA card is inserted to this motherboard.
  • Page 19 Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below. A. Click the number ”2” icon. B. Click the items “This is my main monitor” and “Extend the desktop onto this monitor”. C. Click “OK” to save your change.
  • Page 20: Ati Tm Hybrid Crossfirex

    VGA driver installed in your system. Step 5. Install the onboard VGA driver from our support CD to your system for both the onboard VGA and the discrete graphics card. Step 6. Restart your computer. Then you will find “ATI Catalyst Control Center” on your Windows ®...
  • Page 21 * Hybrid CrossFireX appearing here is a registered trademark of ATI Technologies Inc., and is used only for identification or explanation and to the owners’ benefit, without intent to infringe. * For further information of ATI Hybrid CrossFireX technology, please check AMD website for up dates and details.
  • Page 22: Jumpers Setup

    CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action.
  • Page 23: Onboard Headers And Connectors

    2.8 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA3 Connectors...
  • Page 24 HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A.
  • Page 25 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 26: 64-Bit / Vista

    Driver Installation Guide Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.
  • Page 27: Installing Windows Functions

    If you want to install Windows ® XP / XP 64-bit on your SATA3 HDDs without RAID functions, please follow below steps. Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode) STEP 1: Set up UEFI. Enter UEFI SETUP UTILITY Advanced screen Storage Configuration.
  • Page 28: Untied Overclocking Technology

    Untied Overclocking function, please enter “Overclock Mode” option of UEFI setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.
  • Page 29: Bios Information

    BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to enter BIOS Setup after POST, please restart the system by pressing <Ctl> + <Alt> + <Delete>, or pressing the reset button on the system chassis. The BIOS Setup program is designed to be user-friendly.
  • Page 30 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock 880GM Pro3 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 31: Spezifikationen

    - Alle Feste Kondensatordesign - Unterstützung von Socket AM3+-Prozessoren - Unterstützung von Socket AM3-Prozessoren: AMD Phenom II X6 / X4 / X3 / X2 (außer 920 / 940) / Athlon X4 / X3 / X2 / Sempron-Prozessor - Acht-Kern-CPU-bereit - Unterstützt UCC (Unlock CPU Core) (siehe VORSICHT 1) - V4 + 1-Stromphasendesign - Unterstützt CPU bis 140W...
  • Page 32 - 4 x Standard-USB 2.0-Anschlüsse - 1 x eSATA3-Anschluss - 2 x Standard-USB 3.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - 1 x IEEE 1394 Port - HD Audiobuchse: Lautsprecher hinten / Mitte/Bass /...
  • Page 33 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 34 Durch Betriebssystem-Einschränkungen kann die tatsächliche ® Speichergröße weniger als 4 GB betragen, da unter Windows 7 / Vista™ / XP etwas Speicher zur Nutzung durch das System reserviert wird. Unter ® Windows OS mit 64-Bit-CPU besteht diese Einschränkung nicht. Die Maximalspeichergröße ist von den Chipshändler definiert und umgetauscht.
  • Page 35 Einstellungen als Profi l, welches Sie mit Freunden teilen können. Ihre Freunde können das OC-Profi l dann in ihrem System laden und so die gleichen OC-Einstellungen erzielen. Per IES (Intelligent Energy Saver) kann der Spannungsregulator bei Inaktivität der CPU-Kerne die Anzahl an Ausgangsphasen zur Steigerung der Effi zienz reduzieren –...
  • Page 36 Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.
  • Page 37: Installation

    2. Installation 2. Installation 2. Installation Dies ist ein Motherboard mit einem Micro ATX-Formfaktor (9,6 Zoll x 9,6 Zoll, 24,4 cm x 24,4 cm). Vor Installation des Motherboards müssen Sie die Konfiguration Ihres Gehäuses dahingehend überprüfen, ob das Motherboard dort hineinpasst.
  • Page 38 2.1 CPU Installation 2.1 CPU Installation Schritt 1: Öffnen Sie den CPU-Sockel, indem sie den Hebel leicht zur Seite und dann nach oben ziehen, auf einen Winkel von 90°. Schritt 2: Positionieren Sie die CPU genau so über dem Sockel, dass sich die Ecke der CPU mit dem goldenen Dreieck exakt über der Ecke des...
  • Page 39 Steckplätzen gleicher Farbe installieren. Mit anderen Worten, sie müssen ein identisches DDR3 DIMM-Paar im Dual-Kanal A (DDR3_A1 und DDR3_B1; Blau Steckplätze, siehe Seite 2 Nr. 5) oder ein identisches DDR3 DIMM-Paar im Dual- Kanal B (DDR3_A2 und DDR3_B2; Weiß Steckplätze, siehe Seite 2 Nr. 6) installieren, damit die Dual-Kanal-Speichertechnologie aktiviert werden kann.
  • Page 40 Öffnen Sie einen DIMM-Slot, indem Sie die seitlichen Clips nach außen drücken. Schritt 2: Richten Sie das DIMM-Modul so über dem Slot aus, dass das Modul mit der Kerbe in den Slot passt. Die DIMM-Module passen nur richtig herum eingelegt in die Steckplätze.
  • Page 41 2.4 Erweiterungssteckplätze: (PCI- und PCI Express-Slots): 2.4 Erweiterungssteckplätze: (PCI- und PCI Express-Slots): 2.4 Erweiterungssteckplätze: (PCI- und PCI Express-Slots): Es stehen 2 PCI- und 2 PCI Express-Slot auf dem 880GM Pro3 Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt.
  • Page 42 XP nicht verfügbar. Künftig soll ATI Hybrid CrossFireX jedoch auch vom Betriebssystem Windows ® unterstützt werden. Bei einem Besuch unserer Website können Sie sich darüber informieren. Detaillierte Bedienschritte und kompatible PCI Express-Grafikkarten sind auf Seite 20. ASRock 880GM Pro3 Motherboard...
  • Page 43: Einstellung Der Jumper

    Werkseinstellung zurückzusetzen, schalten Sie bitte den Computer ab und entfernen das Stromkabel. Benutzen Sie eine Jumperkappe, um die Pin 2 und Pin 3 an CLRCMOS1 für 5 Sekunden kurzzuschließen. Bitte vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde.
  • Page 44 2.7 Anschlüsse 2.7 Anschlüsse 2.7 Anschlüsse 2.7 Anschlüsse Anschlussleisten sind KEINE Jumper. Setzen Sie KEINE Jumperkappen auf die Pins der Anschlussleisten. Wenn Sie die Jumperkappen auf die Anschlüsse setzen, wird das Motherboard permanent beschädigt! Anschluss Beschreibung Seriell-ATA3-Anschlüsse Diese fünf Serial ATA3- (SATA3-)Verbínder...
  • Page 45 Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie nachstehend beschrieben an der Front-Audioanschlussleiste: A.
  • Page 46 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...
  • Page 47 Obwohl diese Hauptplatine 8-Pin ATX 12V Stromanschluss zur Verfügung stellt, kann sie noch arbeiten, wenn Sie einen traditionellen 4-Pin ATX 12V Energieversorgung adoptieren. Um die 4-Pin ATX Energieversorgung zu verwenden, stecken Sie bitte Ihre Energieversorgung zusammen mit dem Pin 1 und Pin 5 ein.
  • Page 48 Anschließend werden die mit Ihrem System kompatiblen Treiber automatisch erkannt und auf dem Bildschirm angezeigt. Zur Installation der nötigen Treiber gehen Sie bitte der Reihe nach von oben nach unten vor. Nur so können die von Ihnen installierten Treiber richtig arbeiten.
  • Page 49 ® 7 / 7 64-Bit / Vista / Vista 64-Bit ohne RAID-Funktionalität auf Ihren SATA3-Festplatten installieren, gehen Sie bitte wie folgt vor. Verwendung von SATA3-Festplatten ohne NCQ und Hot-Plug-Funktionen SCHRITT 1: Konfigurieren Sie UEFI. Rufen Sie im UEFI-DIENSTPROGRAMM den Bildschirm „Erweitert“...
  • Page 50 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.
  • Page 51: Contenu Du Paquet

    Contenu du paquet Contenu du paquet Carte mère ASRock 880GM Pro3 (Facteur de forme Micro ATX: 9.6 pouces x 9.6 pouces, 24.4 cm x 24.4 cm) Guide d’installation rapide ASRock 880GM Pro3 CD de soutien ASRock 880GM Pro3 Deux câble de données Serial ATA (SATA) (Optionnelle) Un écran I/O...
  • Page 52: Spécifications

    - Prise en charge des processeurs sur socket AM3+ - Prise en charge des processeurs sur socket AM3: Processeur Phenom II X6 / X4 / X3 / X2 (sauf 920 / 940) / Athlon II X4 / X3 / X2 / Sempron d’AMD - Prêt pour processeurs Huit-Core...
  • Page 53 - Prend en charge le D-Sub avec une résolution maximale jusqu’à 2048x1536 @ 85Hz - Prise en charge de la fonction HDCP avec ports DVI et HDMI - Supporter 1080p Blu-ray(BD)/ lecteur de HD-DVD avec ports DVI et HDMI Audio...
  • Page 54 - FCC, CE, WHQL - Prêt pour ErP/EuP (alimentation Prêt pour ErP/EuP requise) (voir ATTENTION 16) * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 55 La dimension maximum du memoire partage est definie par le vendeur de jeu de puces et est sujet de changer. Veuillez verifier la AMD website pour les informations recentes SVP. Pour l’entrée microphone, cette carte mère supporte les deux modes stéréo et mono.
  • Page 56 CPU pour améliorer les performances du système. Dans OC DNA, vous pouvez enregistrer vos réglages OC dans un profi l et les partager avec vos amis. Vos amis pourront alors installer le profi l OC sur leur système pour utiliser les mêmes réglages OC.
  • Page 57 EuP sont requises. Selon les suggestions d’Intel’, l’alimentation électrique EuP doit correspondre à la norme, qui est que l’efficacité électrique de 5v en mode de veille doit être supérieure à 50% pour 100 mA de consommation de courant. Pour choisir une alimentation électrique conforme à...
  • Page 58 2. Installation 2. Installation Il s’agit d’une carte mère à facteur de forme Micro ATX (9,6 po x 9,6 po, 24,4 cm x 24,4 cm). Avant d’installer la carte mère, étudiez la configuration de votre châssis pour vous assurer que la carte mère s’y insère.
  • Page 59 Etape 1. Déverrouillez le support en relevant le levier selon un angle de 90 Etape 2. Placer l’UC directement au-dessus de la prise pour que le coin de l’UC avec son triangle jaune coïncide avec le petit triangle dans le coin de la prise.
  • Page 60 DIMM DDR3 identiques (de la même marque, de la même vitesse, de la même taille et du même type de puce) dans les slots de même couleur. En d’autres termes, vous devez installer une paire de DIMM DDR3 identiques dans le Canal Double A (DDR3_A1 et DDR3_B1;...
  • Page 61 Si vous adoptez des modules de mémoire DDR3 1866/1800/1600 sur cette carte mère, il est recommandé de les installer dans les fentes DDR3_A2 et DDR3_B2. Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM...
  • Page 62: Installation D'une Carte D'extension

    Slot d’extension (Slots PCI et Slots PCI Express) Slot d’extension (Slots PCI et Slots PCI Express) Il y a 2 ports PCI et 2 ports PCI Express sur la carte mère 880GM Pro3. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 63 Toutefois, veuillez ne pas effacer la CMOS tout de suite après avoir mis le BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à...
  • Page 64 2.7 Connecteurs 2.7 Connecteurs 2.7 Connecteurs 2.7 Connecteurs Les connecteurs NE SONT PAS des cavaliers. NE PLACEZ AUCUN capuchon sur ces connecteurs. Poser les bouchons pour cavaliers audessus des connecteurs provoquera des dommages irrémédiables à la carte mère! Les connecteurs Description Connecteurs Série ATA3...
  • Page 65 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 66 (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur. Si vous prévoyez de connecter le ventilateur de CPU à...
  • Page 67 Bien que cette carte mère possède 8 broches connecteur d’alimentation ATX 12V, il peut toujours travailler si vous adoptez une approche traditionnelle à 4 broches ATX 12V alimentation. Pour utiliser l’alimentation des 4 broches ATX, branchez votre alimentation avec la broche 1 et la broche 5.
  • Page 68 Puis, les pilotes compatibles avec votre système peuvent être détectés automatiquement et sont listés sur la page du pilote du CD. Veuillez suivre l’ordre de haut en bas sur le côté pour installer les pilotes requis. En conséquence, les pilotes que vous installez peuvent fonctionner correctement.
  • Page 69: 64-Bit / Vista

    ® 7 / 7 64-bit / Vista / Vista 64-bit sur vos disques durs SATA3 sans les fonctions RAID, veuillez suivre la procédure ci- dessous. Utilisation des disques durs SATA3 sans NCQ et les fonctions de connexion à chaud ETAP 1: Configurez le UEFI.
  • Page 70: Informations Sur Le Cd De Support

    BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 71 Grazie per aver scelto una scheda madre ASRock 880GM Pro3, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Page 72 - Supporto di processori Socket AM3+ - Supporto di processori Socket AM3: AMD Phenom II X6 / X4 / X3 / X2 (fatta eccezione per 920 / 940) / Athlon II X4 / X3 / X2 / Sempron - CPU Otto-Core Ready...
  • Page 73 SATA3 - 5 x Connettori SATA3 6,0Gb/s, supporto RAID (RAID 0, RAID 1, RAID 0+1 e RAID 5) e delle funzioni NCQ, AHCI e “Hot Plug” USB 3.0 - 2 x Porte USB 3.0 Etron EJ168A, supporto di USB 1.0/2.0/3.0 fino...
  • Page 74 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 75 L3 fino a 6MB, e questo significa che le prestazioni CPU sono migliorate ad un prezzo conveniente. Si prega di notare che la funzione UCC è supportata solo da CPU AM3/ AM3+; inoltre, non tutte le CPU AM3/AM3+ supportano questa funzione perché...
  • Page 76 CD ASRock fornito in dotazione, e scaricare gratuitamente AIWI Lite dall’App Store sull’iPhone/iPod touch. Collegare il PC ed i dispositivi Apple usando Bluetooth o la rete WiFi e poi si può iniziare a divertirsi con i giochi controllati dal movimento. Non scordare di vistare regolarmente il...
  • Page 77 Internet. Le schede madre ASRock hanno in dotazione esclusiva l’utilità SmartView che aiuta a stare in contatto con gli amici mentre si è in movimento. Per usare la funzione SmartView, assicurarsi che la versione del sistema operativo ®...
  • Page 78 2. Installazione Questa è una scheda madre con Form Factor Micro ATX (9.6 pollici x 9.6 pollici; 24,4 cm x 24,4 cm). Prima di installare la scheda madre, studiare la configurazione del telaio per assicurarsi che la scheda madre vi si adatti.
  • Page 79 2.1 Installazione del processore Step 1. Aprire lo zoccolo sollevando la leva da un angolo di 90°. Step 2. Posizionare la CPU direttamente sopra la presa in modo tale che l’angolo della CPU con il triangolo dorato corrisponda all’angolo della presa con il triangolino.
  • Page 80 2.3 Installazione dei moduli di memoria (DIMM) La scheda madre 880GM Pro3 fornisce quattro alloggiamenti DIMM DDR3 (Double Data Rate 3) a 240 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDR3 negli alloggiamenti...
  • Page 81 Sbloccare lo slot DIMM premendo i fermi che lo trattengono verso l’esterno. Step 2. Allineare una DIMM sullo slot così che il pettine della DIMM combaci con la sua sede sullo slot. La DIMM può essere montata correttamente soltanto con un orientamento.
  • Page 82 Step 2. Rimuovere i ganci sullo slot che si intende utilizzare. Tenere a portata di mano le viti. Step 3. Allineare il connettore della scheda con lo slot e premere con decisione finché...
  • Page 83 Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin.
  • Page 84 2.7 Connettori 2.7 Connettori 2.7 Connettori 2.7 Connettori 2.7 Connettori I connettori NON sono jumpers. NON COLLOCARE i ponticelli sui connettori. Installando dei cappucci a ponticello sui connettori si causeranno danni permanenti alla scheda madre! Connettori Descrizione dei connettori Connettori Serial ATA3...
  • Page 85 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 86 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 87 Quindi, i driver compatibili con il sistema vengono rilevati automaticamente ed elencati nella pagina del driver del CD in dotazione. Per l’installazione dei driver necessari, procedere in base ad un ordine dall’alto verso il basso. In tal modo, i driver installati funzioneranno correttamente.
  • Page 88 7 / 7 64-bit / Vista / Vista 64-bit / XP / XP 64-bit sulle unità disco rigido SATA3 senza funzioni RAID, attenersi alle procedure che seguono relative al sistema operativo che si installa. 2.10.1 Installazione di Windows 2.10.1 Installazione di Windows...
  • Page 89 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.
  • Page 90 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 91 Especificación Especificación Especificación Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 24,4 cm, 9,6” x 9,6” - Todo diseño de Capacitor Sólido Procesador - Compatibilidad con procesadores con conector AM3+ - Compatibilidad con procesadores con conector AM3: procesador AMD Phenom...
  • Page 92 - 4 x puertos USB 2.0 predeterminados - 1 x Conector eSATA3 - 2 x puertos USB 3.0 predeterminados - 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y LED de VELOCIDAD) - 1 x puerto IEEE 1394 - Conexión de audio: Altavoz trasero / Central/Bajos / Entrada...
  • Page 93 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 94 CPU adicional y disfrutar de un aumento de rendimiento instantáneo. La activación de la función UCC permite elevar la potencia de una CPU de doble o triple núcleo a un nivel equivalente al de una CPU de cuádruple núcleo y, en el caso de algunas CPUs, entre ellas las CPUs de cuádruple núcleo, aumentar el tamaño de la memoria...
  • Page 95 PC. Tan solo tiene que instalar la utilidad ASRock AIWI desde el sitio web oficial de ASRock AIWI, o bien mediante el CD de soporte de software de ASRock en su placa base, y también descargarse gratis AIWI Lite de la tienda de aplicaciones de su iPhone o iPod touch.
  • Page 96 Sitio web de ASRock: http://www.asrock.com/Feature/ AppCharger/index.asp 12. SmartView, una nueva función el explorador de Internet, es la página de inicio inteligente para IE que combina los sitios Web más visitados, su historial, sus amigos de Facebook y su fuente de noticias en una vista mejorada para disfrutar de una experiencia en Internet más personal.
  • Page 97: Instalación

    2. Instalación 2. Instalación Esta placa base tiene un factor de forma Micro ATX (9,6 pulgadas x 9,6 pulgadas, 24,4 cm. x 24,4 cm). Antes de instalar la placa base, estudie la configuración de su chasis para asegurarse de que la placa base cabe en él.
  • Page 98: Instalación Del

    Paso 3. Coloque cuidosamente el CPU en el zócalo. El CPU se encaja al zócalo a una sola orientación. No esfuerce el CPU en el zócalo para prevenir encorvados de los pins del CPU. Si no puede encajar el CPU, examine su orientación o examine si los pins están ya...
  • Page 99: Instalación De Memoria

    DDR3 DIMM de Doble Canal A (DDR3_A1 y DDR3_B1; Ranuras Azul; consulte la p. 2 N. 5) o pares idénticos DDR3 DIMM en el Doble Canal B (DDR3_A2 y DDR3_B2; Ranuras Blanco; consulte p.2 N.6), de modo que pueda activarse la Tecnología de Memoria de Doble Canal.
  • Page 100 Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema. Paso 1. Empuje los clips blancos de retención por el extremo de cada lado de la ranura de memoria. Paso 2. Encaje la muesca del DIMM hacia la cumbrera de la ranura.
  • Page 101 Paso 2. Quite la tapa que corresponde a la ranura que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la ranura. Empuje firmemente la tarjeta en la ranura. Paso 4. Asegure la tarjeta con tornillos.
  • Page 102 Valor predeterminado Restablecimiento de la CMOS Atención: CLRCMOS1 permite que Usted limpie los datos en CMOS. Los datos en CMOS incluyen informaciones de la configuración del sistema, tales como la contraseña del sistema, fecha, tiempo, y parámetros de la configuración del sistema.
  • Page 103 2.7 Conectores 2.7 Conectores 2.7 Conectores 2.7 Conectores Los conectores no son jumpers. Por favor no ponga jumper caps sobre los conectores. El colocar cubiertas de puentes sobre los conectores provocará un daño permanente en la placa base. Conector Figure Descripción...
  • Page 104 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 105 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 106 Aunque esta placa base proporciona un conector de energía de 8-pin ATX 12V, puede todavía trabajar si usted adopta un fuente tradicional de energía de 4-pin ATX 12V. Para usar el fuente de energía de 4-pin ATX 12V, por favor conecte su fuente de energía junto con Pin 1 y Pin 5.
  • Page 107 Guía de instalación del controlador Guía de instalación del controlador Para instalar los controladores en el sistema, inserte en primer lugar el CD de soporte en la unidad óptica. A continuación, se detectarán automáticamente los controladores compatibles con el sistema y se mostrarán en la página de controladores de CD compatibles.
  • Page 108 / Vista 64 bits en sus HDDs SATA3 sin funciones RAID, por favor siga los pasos siguientes. Uso de dispositivos SATA3 sin funciones NCQ y de Conexión en Caliente PASO 1: Configure UEFI. Entre a la Utilidad de configuración de UEFI pantalla de Avanzada Configuración Storage.
  • Page 109 / Vista / Vista 64 bits / XP / XP Media Center / XP 64 bits El CD de instalación que acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y configurar la placa-base. Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará...
  • Page 110 ASRock 880GM Pro3 Motherboard...
  • Page 111 ASRock 880GM Pro3 Motherboard...
  • Page 112 ASRock 880GM Pro3 Motherboard...
  • Page 113 ASRock 880GM Pro3 Motherboard...
  • Page 114 ASRock 880GM Pro3 Motherboard...
  • Page 115 ASRock 880GM Pro3 Motherboard...
  • Page 116 ASRock 880GM Pro3 Motherboard...
  • Page 117 íà 90° ââåðõ ASRock 880GM Pro3 Motherboard...
  • Page 118 ASRock 880GM Pro3 Motherboard...
  • Page 119 ASRock 880GM Pro3 Motherboard...
  • Page 120 ASRock 880GM Pro3 Motherboard...
  • Page 121 Short Open Ñòàíäàðòíûå Î÷èñòêà CMOS ASRock 880GM Pro3 Motherboard...
  • Page 122 ASRock 880GM Pro3 Motherboard...
  • Page 123 IR1) ASRock 880GM Pro3 Motherboard...
  • Page 124 4 3 2 1 ASRock 880GM Pro3 Motherboard...
  • Page 125 ASRock 880GM Pro3 Motherboard...
  • Page 126 ASRock 880GM Pro3 Motherboard...
  • Page 127 ASRock 880GM Pro3 Motherboard...
  • Page 128 ASRock 880GM Pro3 Motherboard...
  • Page 129 ASRock 880GM Pro3 Motherboard...
  • Page 130 ASRock 880GM Pro3 Motherboard...
  • Page 131 ASRock 880GM Pro3 Motherboard...
  • Page 132 ASRock 880GM Pro3 Motherboard...
  • Page 133 ASRock 880GM Pro3 Motherboard...
  • Page 134 ASRock 880GM Pro3 Motherboard...
  • Page 135 ASRock 880GM Pro3 Motherboard...
  • Page 136 ASRock 880GM Pro3 Motherboard...
  • Page 137 ASRock 880GM Pro3 Motherboard...
  • Page 138 ASRock 880GM Pro3 Motherboard...
  • Page 139 ASRock 880GM Pro3 Motherboard...
  • Page 140 ASRock 880GM Pro3 Motherboard...
  • Page 141 Short Open Default Clear CMOS ASRock 880GM Pro3 Motherboard...
  • Page 142 ASRock 880GM Pro3 Motherboard...
  • Page 143 ASRock 880GM Pro3 Motherboard...
  • Page 144 4 3 2 1 ASRock 880GM Pro3 Motherboard...
  • Page 145 (bkz. s.2 No.24) ASRock 880GM Pro3 Motherboard...
  • Page 146 ASRock 880GM Pro3 Motherboard...
  • Page 147 ASRock 880GM Pro3 Motherboard...
  • Page 148 ASRock 880GM Pro3 Motherboard...
  • Page 149 ASRock 880GM Pro3 Motherboard...
  • Page 150 ‘ ’ ASRock 880GM Pro3 Motherboard...
  • Page 151 ® “ ” ASRock 880GM Pro3 Motherboard...
  • Page 152 ® ASRock 880GM Pro3 Motherboard...
  • Page 153 “ ” “ ” ® ® ASRock 880GM Pro3 Motherboard...
  • Page 154 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 155 ASRock 880GM Pro3 Motherboard...
  • Page 156 ASRock 880GM Pro3 Motherboard...
  • Page 157 “ ”( ASRock 880GM Pro3 Motherboard...
  • Page 158 ASRock 880GM Pro3 Motherboard...
  • Page 159 ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 160 “ ” “ ” “ ” ASRock 880GM Pro3 Motherboard...
  • Page 161 ASRock 880GM Pro3 Motherboard...
  • Page 162 ® “ ” “ ” “ ” ® “ ” “ ” ASRock 880GM Pro3 Motherboard...
  • Page 163 4 3 2 1 ASRock 880GM Pro3 Motherboard...
  • Page 164 ® ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 165 ® ® ® ® ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 166 “ ” “ ” ASRock 880GM Pro3 Motherboard...
  • Page 167 ASRock 880GM Pro3 Motherboard...
  • Page 168 ‘ ’ ASRock 880GM Pro3 Motherboard...
  • Page 169 ® ASRock 880GM Pro3 Motherboard...
  • Page 170 ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 171 “ ” ® ® ASRock 880GM Pro3 Motherboard...
  • Page 172 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 173 ASRock 880GM Pro3 Motherboard...
  • Page 174 ASRock 880GM Pro3 Motherboard...
  • Page 175 ASRock 880GM Pro3 Motherboard...
  • Page 176 ASRock 880GM Pro3 Motherboard...
  • Page 177 ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 178 ASRock 880GM Pro3 Motherboard...
  • Page 179 ASRock 880GM Pro3 Motherboard...
  • Page 180 ® “ ” “ ” “ ” ® “ ” “ ” ASRock 880GM Pro3 Motherboard...
  • Page 181 4 3 2 1 ASRock 880GM Pro3 Motherboard...
  • Page 182 ® ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 183 ® ® ® ® ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 184 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 185 ASRock 880GM Pro3 Motherboard...
  • Page 186 ™ ‘ ’ ASRock 880GM Pro3 Motherboard...
  • Page 187 ® ASRock 880GM Pro3 Motherboard...
  • Page 188 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 189 ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 190 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 191 ASRock 880GM Pro3 Motherboard...
  • Page 192 ASRock 880GM Pro3 Motherboard...
  • Page 193 ASRock 880GM Pro3 Motherboard...
  • Page 194 ASRock 880GM Pro3 Motherboard...
  • Page 195 ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 196 ASRock 880GM Pro3 Motherboard...
  • Page 197 ASRock 880GM Pro3 Motherboard...
  • Page 198 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 199 4 3 2 1 ASRock 880GM Pro3 Motherboard...
  • Page 200 ® ® ® ® ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 201 ® ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 202 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 203 ASRock 880GM Pro3 Motherboard...
  • Page 204 ASRock 880GM Pro3 Motherboard...
  • Page 205 ASRock 880GM Pro3 Motherboard...
  • Page 206 ® ASRock 880GM Pro3 Motherboard...
  • Page 207 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 208 ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 209 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 210 ASRock 880GM Pro3 Motherboard...
  • Page 211 ASRock 880GM Pro3 Motherboard...
  • Page 212 ASRock 880GM Pro3 Motherboard...
  • Page 213 ASRock 880GM Pro3 Motherboard...
  • Page 214 ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 215 ASRock 880GM Pro3 Motherboard...
  • Page 216 ASRock 880GM Pro3 Motherboard...
  • Page 217 ® ® ASRock 880GM Pro3 Motherboard...
  • Page 218 4 3 2 1 ASRock 880GM Pro3 Motherboard...
  • Page 219 ® ® ® ® ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 220 ® ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 221 ® ® ® ASRock 880GM Pro3 Motherboard...
  • Page 222: Installing Os On A Hdd Larger Than 2Tb

    2. Set AHCI Mode in UEFI Setup Utility > Advanced > Storage Configuration > SATA Mode. 3. Press F11 to launch boot menu at system POST. 4. Choose the item “UEFI:xxx“ to boot. (“xxx” is the device which contains ® your Windows installation fi les.

Table of Contents