Storage Configuration - ASROCK 870ICAFE - V1.0 User Manual

3.4.4 3.4.4

Storage Configuration

Storage Configuration
3.4.4 Storage Configuration 3.4.4 3.4.4 Storage Configuration Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
Onboard SATA Controller [Enabled]
SATA Operation Mode [IDE]
SATA IDE Combined Mode [Enabled]
SATA3_1 [Hard Disk]
SATA3_2 [Not Detected]
SATA3_3 [Not Detected]
SATA3_4 [Not Detected]
[Not Detected]
SATA3_5
SATA3_6 [Not Detected]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard SATA Controller
Use this item to enable or disable the "Onboard SATA Controller" feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [IDE]. Configuration options: [AHCI], [RAID] and [IDE].
If you set this item to RAID mode, it is suggested to install
SATA ODD driver on SATA5 port.
SATA IDE Combined Mode
This item is for SATA5 and SATA6 ports only. Use this item to enable or
disable SATA IDE combined mode. The default value is [Enabled].
If you want to build RAID on SATA5 and SATA6 ports, please
disable this item.
Configure onboard
serial ATA
controller.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 6 4 6 4 6 4 6 4 6