ASROCK 775V88 Installation Manual page 8

2.1 775-LAND CPU Installation 2.1 775-LAND CPU Installation 2.1 775-LAND CPU Installation
2.1 775-LAND CPU Installation 2.1 775-LAND CPU Installation
For the installation of Intel 775-LAND CPU,
please follow the steps below.
Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
Step 1. Open the socket:
Step 1-1. Disengaging the lever by depressing
Step 1-2. Rotate the load lever to fully open po-
Step 1-3. Rotate the load plate to fully open po-
Step 2. Insert the 775-LAND CPU:
Step 2-1. Hold the CPU by the edges where are
Step 2-2. Orient the CPU with IHS (Integrated
Pin1
orientation
key notch
775-LAND CPU
8 8 8 8 8
down and out on the hook to clear
retention tab.
sition at approximately 135 degrees.
sition at approximately 100 degrees.
marked with black lines.
Heat Sink) up. Locate Pin1 and the two
orientation key notches.
orientation
key notch
ASRock 775V88/775V88+ Motherboard
775-Pin Socket Overview
Pin1
alignment key
alignment key
775-Pin Socket