ASROCK 775V88 User Manual page 19

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
USB 2.0 Header
(9-pin USB67)
(see p.8, No. 18)
Infrared Module Header
(5-pin IR1)
(see p.8, No. 26)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.8, No. 20)
(AUX1: see p.8, No. 23)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.8, No. 22)
System Panel Header
(9-pin PANEL1)
(see p.8, No. 15)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.8, No. 16)
power connector
connect to the
power supply
USB_PWR
P-7
P+7
GND
DUMMY
1
GND
P+6
P-6
USB_PWR
IRTX
+5V
DUMMY
1
GND
IRRX
CD-R
AUX-R
GND
GND
GND
GND
AUX-L
CD-L
AUX1
GND
+5VA
BACKOUT-R
BACKOUT-L
1
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
PLED+
PLED-
PWRBTN#
GND
1
DUMMY
RESET#
GND
HDLED-
HDLED+
1
SPEAKER
DUMMY
DUMMY
+5V
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
ASRock I/O Plus
6 ready-to-use USB 2.0 ports on
the rear panel. If the rear USB
ports are not sufficient, this
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
This header supports an optional
wireless transmitting and
receiving infrared module.
These connectors allow you
to receive stereo audio input
from sound sources such as
CD1
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for the front
panel audio cable that allows
convenient connection and
control of audio devices.
This header accommodates
several system front panel
functions.
Please connect the chassis
speaker to this header.
TM
provides you