Pcipnp Configuration - ASROCK 775DUAL-915GV User Manual

Block (Multi-Sector Transfer)
The default value of this item is [Auto]. If this feature is enabled, it will
enhance hard disk performance by reading or writing more data during
each transfer.
PIO Mode
Use this item to set the PIO mode to enhance hard disk performance by
optimizing the hard disk timing.
DMA Mode
DMA capability allows the improved transfer-speed and data-integrity for
compatible IDE devices.
S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) feature. Configuration options: [Disabled], [Auto],
[Enabled].
32Bit Data Transfer
Use this item to enable 32-bit access to maximize the IDE hard disk data
transfer rate.
3.3.5 3.3.5

3.3.5 PCIPnP Configuration

3.3.5 3.3.5 PCIPnP Configuration PCIPnP Configuration PCIPnP Configuration PCIPnP Configuration
BIOS SETUP UTILITY
Advanced
PCI / PnP Configuration
WARNING: Setting wrong values in below actions
may cause system to malfunction.
PCI Latency Timer
PCI IDE BusMaster
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
PCI Latency Timer
The default value is 32. It is recommended to keep the default value unless
the installed PCI expansion cards' specifications require other settings.
PCI IDE BusMaster
Use this item to enable or disable the PCI IDE BusMaster feature.
Value in units of PCI
clocks for PCI device
latency timer
register.
[32]
[Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
3 5 3 5 3 5
3 5 3 5