Omron S8M Product Manual page 11

Key Operations and Displays in Each Mode
When power was turned
OFF in any mode except
Test Mode
Run Mode
Input Voltage
Display
(See note.)
Output Current
Display
Peak Output
Current Display
peak output current.
Or no key operation for
more than 3 s.
Total Current
Display
Run Time Display
Temperature
Display
Press for 3 s.
Or no key operation for
more than 5 s.
Mode Selection
Menu
Run Mode
Note: Settings are displayed in order for branch outputs 1 to 4. Specific branch output settings have been omitted.
Abnormal Current
Tripping Value
Abnormal Current
Tripping Type
Overcurrent
Clearing selected
Alarm Value
Overcurrent
Alarm Type
Undervoltage
Alarm Value
Overvoltage
Alarm Value
Run Time
Alarm Value
Over-temperature
Output Value
Startup Sequence
Time Setting (See note.)
Shutdown Sequence
Time Setting (See note.)
External Tripping Input
Setting (See note.)
Communications Settings
(Models with
communications only)
Clearing
the Run Time
Setting Mode
Power ON
When power was turned
ON for the first time
Setting Mode
(See note.)
Value Setting
No key operation for more than 3 s.
Standard/
Instantaneous
No key operation for more than 3 s.
Value Setting
No key operation for more than 3 s.
Standard/
Instantaneous
No key operation for more than 3 s.
Value Setting
No key operation for more than 3 s.
Value Setting
No key operation for more than 3 s.
Value Setting
No key operation for more than 3 s.
Value Setting
No key operation for more than 3 s.
Time Setting
No key operation for more than 3 s.
Time Setting
No key operation for more than 3 s.
Enable/Disable
Setting
No key operation for more than 3 s.
Settings
No key operation for more than 3 s.
YES/NO
Or no key operation for
more than 3 s.
Press for 3 s.
Test Mode Protection Level
Level Selection
Digital Multicircuit Protector
When power was
turned OFF in
Test Mode
Test Mode
Branch Output 1
Cut off
Connected
Branch Output 2
Cut off
Connected
Branch Output 3
Cut off
Connected
Branch Output 4
Cut off
Connected
Cut off all branch outputs
(Shutdown Sequence)
Execute
Connect all branch outputs
(Startup Sequence)
Execute
Press for 3 s.
Parameter Initialization
Press for 3 s. Press for 3 s.
Yes, initialize.
S8M
11