Name And Function Of Each Part - Omron F250 Datasheet

Name and function of each part

Controller: F250-C50/C55
E
A POWER LED (green)
Illuminates while the power is on.
B RUN LED (orange)
Illuminates while the system is in measure-
ment mode.
C ERROR LED (red)
Illuminates when a problem occurs.
D Input connectors 0, 1
Connects to a synchronous sensor or pro-
grammable controller.
E Power terminal
Connects to a DC power supply.
F Console connector
Connects to the console.
G Memory card LEDs 0, 1
Illuminates while power is supplied to the mem-
ory card.
C-50
L K
N I
J M H
D A B C
H Memory card slots 0, 1
A memory card or software application is inserted here.
I CAMERA 0 - 3 connectors
Connects to a camera.
J Monitor connector (S-Video output)
Connects to a monitor with an S-Video input
K Ethernet connector
Connects to a computer.
L RS-232C/422 connector
Connects to a computer or programmable controller.
M Monitor connector (composite video output)
Connects to a monitor.
N Ground terminal
Connect the ground wire to this terminal.
G
F
Vision Systems