Omron D40A-G9SX-NS Datasheet

D40A/G9SX-NS

Ordering information

Non-contact door switches (Switch/Actuator)
Classification
Standard models
*1
PNP open-collector semiconductor output.
Note: Must be used in combination with a G9SX-NS_ non-contactdoor switch controller.
On-contact door switch controllers (Controllers for D40A)
*1
Safety outputs
*4
Instantaneous OFF-delayed
2 (Semi- 0
conductors)
2 (Semi-
conductors)
*1
P channel MOS FET transistor output
*2
PNP transistor output
*3
The OFF-delay time can be set in 16 steps as follows:
0/0.2/0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0/1.2/1.4/1.8/2.0/2.5/3.0 s
*4
The OFF-delayed output becomes an instantaneous output by setting the OFF-delay time to 0 s.

Specifications

Ratings/Characteristics of non-contact door switches
Item Model
Operating distance OFF→ON
Operating
Operating distance ON→OFF
*1
characteristics
Differential travel (max.)
Ambient operating temperature
Vibration resistance
Shock resistance
Degree of protection
Material
Mounting method
Power consumption
*2
Auxiliary outputs
LED indicators
Connection cables
Number of connectable switches
*1
This is the distance where the switch operates from OFF to ON when approaching and the distance where the switch operates from ON to OFF when separating when the switch and actuator target
marks are on the same axis, and the sensing surfaces coincide.
*2
Turns ON when the actuator is approaching.
Auxiliary outputs
*1
Semiconductor outputs
Auxiliary Logical AND
*2
outputs connection input
2 (Semi- 1
conductors)
D40A-1C_
5 mm min.
15 mm max.
20% of operating distance
−10 to 55°C (no icing or condensation)
10 to 55 to 10 Hz (single amplitude: 0.75 mm, double amplitude: 1.5 mm)
2
300 m/s
IP67
PBT resin
M4 screws
0.6 W max.
24 VDC, 10 mA (PNP open-collector outputs)
Actuator not detected (red); actuator detected (yellow)
2 m, 5 m
30 max. (wiring length: 100 m max.)
Compact non-contact door switch/
flexible safety unit
Electronic detection mechanism for better stability in non-contact door switch
operation
• Stable operation reduces controller errors caused by unstable doors.
• Connect up to 30 non-contact door switches with LED indicators to one controller.
• Reversible switch provides flexibility in installation.
• Two-color LED indicator enables easier maintenance by identification of door
status and cable disconnections.
• Safety category 3 (EN 954-1).
Cable length
2 m
5 m
Logical AND Max. OFF
*3
connection output delay time
1 –
3.0 s
min.
Safety controllers
Rated Terminal block type
voltage
24 VDC Screw terminals
Spring-cage terminals
Screw terminals
Spring-cage terminals
Order code
D40A-1C2
D40A-1C5
Order code
G9SX-NS202-RT
G9SX-NS202-RC
G9SX-NSA222-T03-RT
G9SX-NSA222-T03-RC