Adding And Deleting Mc Units - Omron CX-MOTION-MCH Operation Manual

Adding and Deleting MC Units

4-2 Adding and Deleting MC Units
Adding MC Units to
Projects
1,2,3...
Deleting MC Units
1,2,3...
Follow the procedure below to add a Motion Control Unit to the project.
1. Select the PLC icon in the project tree and select Insert - MC or click
in the toolbar. It is also possible to right-click the PLC icon in the project
tree and select Insert MC from the pop-up menu.
2. Set the MC Unit's name, model number, and unit number (unit number as
a CPU Bus Unit) in the Insert MC Dialog Box.
3. Click the OK Button. The MC Unit will be added to the project.
1. Select the unwanted MC Unit icon (
- Delete, click in the toolbar, or press the Delete Key. It is also possi-
ble to right-click the unwanted MC Unit icon in the project tree and select
Delete from the pop-up menu.
2. A dialog box will be displayed to confirm the deletion. Click the Yes Button
to delete the MC Unit. The selected MC Unit will be deleted from the
project tree.
Section 4-2
) in the project tree and select Edit
31