Omron A - DATASHEET 2 Datasheet

Z/A/X/DZ Common Accessories
Z/A/X/DZ

Ordering Information

■ List of Models
Terminal Covers (Sold Separately)
Common to Z, A, X, and DZ Models
The Terminal Cover is secured with mounting screws and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing
terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open for providing holes for lead cables at
desired points.
Material
Phenol resin Side mounting
Metal press mold Side mounting
Vinyl chloride Side mounting
Note: Use the screw-terminal use Terminal Cover for DZ-series soldering-terminal models.
Separator (Sold Separately)
Common to Z, A, X, and DZ Models
Model: Separator for Z
Actuators (Sold Separately)
Common to Z and X Models
A Switch can be actuated by a cam or an appropriate object, in which case, use one of the following Actuators according to the application.
Actuator
Hinge lever
Hinge roller lever
Short
Panel mount plunger
Medium
Long
Panel mount roller plunger
Application Soldering terminal use
Mounting direction
AP-A
AP1-A
AP-Z
Common to Z and X models
XAA-1
ZAA-2
ZAQ-3
ZAQ-2
ZAQ-1
ZAQ-22
Screw terminal use
Model
AP-B
AP1-B
Z/A/X/DZ Common Accessories
Remarks
---
Used for AP-A and AP-B
---
Z/A/X/DZ
F-189