Sennheiser SKP 100 G3 Instruction Manual page 17

Adjusting settings via the operating menu
Setting the mode for the MUTE switch – "Mute Mode"
Advanced Menu
Mute Mode
Call up
"Mute Mode"
Mode
"AF On/Off"
"RF On/Off"
"Disabled"
For information on how to use the
Activating/deactivating the pilot tone transmission –
"Pilot Tone"
Advanced Menu
Name
Pilot Tone
Call up
"Pilot Tone"
The plug-on transmitter adds an inaudible pilot tone to the audio signal.
The receiver detects and evaluates the pilot tone, and is thus able to
identify the signal of the matching transmitter and mute all others. The
pilot tone supports the receiver's squelch function.
Devices of the ew 100 G1 series (generation 1) do not support the pilot
tone function. Therefore, please observe the following when combining a
transmitter or receiver of the ew 100 G3 series (generation 3) with devices
from an earlier evolution wireless generation:
Transmitter
w G3/ w G2
w G3
w G1
Adjusting the contrast of the display panel – "LCD Contrast"
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu – "Reset"
Advanced Menu
Reset
Call up "Reset"
When resetting the settings made in the operating menu, only the
selected settings for the pilot tone and for the frequency bank "U" remain
unchanged. For an overview of the factory-preset default settings, refer to
the enclosed frequency information sheet.
Displaying the software revision – "Software Revision"
You can display the current software revision of the plug-on transmitter.
16
SET
Mute Mode
AF On/Off
Select the desired
setting
"Stored"
Function
When the switch is in the
no audio signal is transmitted.
When the switch is in the
the RF signal is deactivated.
The muting function is deactivated.
SET
P i l o t
A c t i v e
Select the desired
setting
"Stored"
Receiver
w G3/ w G2
w G1
w G3
SET
Reset
Yes
Select the desired
setting; apply the
setting
SET
"Stored"
MUTE position,
MUTE position,
MUTE switch , refer to page 8.
Make sure to ...
... activate the pilot tone function
on both transmitter and receiver.
... deactivate the pilot tone function
on the ew 100 G3 transmitter.
... deactivate the pilot tone function
on the ew 100 G3 receiver.
Mute Mode
RF On/Off
Store the setting
SET
P i l o t
I n a c t i v e
Store the setting
SET