Sennheiser MD 431 Technical Data

MD 431 II
Microphones |
General Description
By virtue of its design and features, the MD 431 II ranks amongst
Sennheiser's most exceptional microphones and is suitable for vocal,
speech and broadcasting applications. Colour: black.
Cable pictured is an accessory not supplied with the microphone
Features
Exceptionally good feedback rejection
Shock mounted capsule provides very good rejection of handling noise
Hum compensating coil
Integral pop filter
On/off switch (reed switch) can be locked in the 'ON' position if required
Delivery includes: 1 MD 431 II
1 MZA 4031 quick release clamp
Recommended Accessories
MZT 100 table stand
MZT 441 table stand
MZT 14 mounting bolt
MZW 4032 foam windshield
MZW 416-1 foam windshield
Dynamic Microphone
Cat. No. 001883
Cat. No. 000799
Cat. No. 001895
Cat. No. 002978
Cat. No. 001536
Technical Data
Pick-up pattern ...........................................................super-cardioid
Frequency response ................................................. 40 – 16,000 Hz
Sensitivity (free field, no load, 1 kHz)................. 2 mV/Pa ± 3 dB
Nominal impedance ................................................................. 250 Ω
Min. terminating impedance ..................................................... 1 kΩ
Dimensions ................................... Ø 49 x 200 mm, body Ø 31 mm
Weight ...........................................................................approx. 250 g
Profile
Super-cardioid stage microphone, hum compensating coil,
integral popshield, reed on/off switch, frequency response
40 – 16,000 Hz, sensitivity (free field, no load) 2 mV/Pa
± 3 dB at 1 kHz, nominal impedance 250 Ω, min. terminating
impedance 1 kΩ, dimensions Ø 49 x 200 mm, body Ø 31 mm,
weight approx. 250 g.
Cat. No. 001605