Advertisement
i30H-L
MZC 30
.98"
[24.9mm]
Ø.32"
[8.1mm]
[24.6mm]
MZH 30
.34"
[8.6mm]
Architects Specifications
The hanging mic system shall be modular and facilitate integration of different polar-patterned capsules. It must utilize a condenser transducer element
operational with 48v phantom power and have a frequency response of 40 Hz–20,000 Hz. The transducer must have shotgun directional characteristics,
utilizing interference tube technology and also be small and streamlined, no longer than 96 mm (3.8") with a diameter no larger than 6.6 mm (.26").
The 9 meter (29.5") hanging cable must have a 1 mm thickness, be Kevlar reinforced, and terminate to a pre-amp housed XLR connector. The system
must maintain strict on axis positioning using a low mass wire hanger with a 2 mm (.08") thickness. The system must be a Sennheiser i30H-L.
Limited Product Warranty/Service
Sennheiser Electronic Corporation extends the following limited product warranty for Sennheiser products:
The warranty period for all covered Sennheiser products is two years from the date of purchase. Not covered by this warranty are accessories and other consumables;
for example, items of wear and tear, such as cables. During the warranty period, Sennheiser Electronic Corporation warrants that the Sennheiser equipment will be
free from defects in materials and workmanship used in making the product. Abnormal conditions, deliberate abuse and damage due to accidents, operator's error, or
unauthorized service attempts are excluded from any warranty claims.
Under this warranty, Sennheiser Electronic Corporation will repair, or at its option, replace free of charge the covered defective Sennheiser product, provided it is returned
(postage paid, with proof of purchase from the original seller) to a Sennheiser Service Facility. Products should be returned in their original package, or otherwise suitably
protected to avoid shipping damage. Either product registration or a valid, dated proof of purchase is accepted to establish the warranty period. The Sennheiser Service
Department will be the sole authority to determine the validity of all warranty issues.
This Limited Product Warranty is Sennheiser Electronic Corporation's only warranty, and the customer's only remedy concerning Sennheiser products. All other rep-
resentations and warranties, express or implied, written or oral, including, but not limited to, any warranties of merchantability, fitness for a particular purpose, or
non-infringement, are expressly excluded. As a result, except as set forth in the previous paragraphs, the product is sold "as-is" and the customer is assuming the
entire risk as to the product's suitability for his needs, its quality and its performance.
In no event will Sennheiser Electronic Corporation be liable for direct, indirect, special, incidental or consequential damages resulting from any defect in the product or
from its use, even if advised of the possibility of such damages.
Sennheiser Electronic Corporation • 1 Enterprise Drive • Old Lyme, CT 06371
4.23"
[107.4mm]
1.86"
[47.2mm]
2.65"
[67.3mm]
Ø.75"
[19.0mm]
.97"
3.13"
[79.5mm]
.53"
[13.5mm]
Ø.04"
[1.0mm]
1.78"
105º
[45.2mm]
3.89"
[98.8mm]
The MZC 30 is a 9 m (28') cable for hanging applications of
the ME 34, ME 35 and ME 36 capsules and boundary layer
application of the ME 36 capsule. The sturdy 1 mm Kevlar
reinforced cable has a copper core and terminates to an XLR
connectorized preamp to accommodate P48 powering.
The MZH 30 is a lightweight (0.1 oz) hanger accessory designed
to interface with ME 34, ME 35 and ME 36 capsules. Its nearly
invisible 1.1 mm diameter black wire design is durable and
strictly maintains on-axis placement.
Advertisement
