Sennheiser I40-L Product Sheet

i40-L
Microphones |
Kit Includes:
ME 36 Capsule
MZH 3040 Gooseneck
MZT 30 XLR Receptacle
MZS 31 Shockmount
General Description
Sennheiser's modular Installed Sound Series microphones kits for podium,
hanging, boundary layer and table stand applications facilitate all possible
installation configurations at affordable prices. At the heart of the series are
three superbly engineered capsules: the ME 34 cardioid, the ME 35 super cardioid
and the unique lobar-patterned ME 36 mini shotgun. Each capsule can interface
with three different goosenecks: the 15 cm MZH 3015 (6"), the 40 cm MZH 3040
(15.75") and the dual flex 40 cm MZH 3042 (15.75"), all designed to maintain
proper capsule placement. Each system requires 12-48 volt phantom power.
All contact points are gold plated and corrosion resistant. All components have
anti-reflective matte black surfaces.
ME 36
Ø.33"
[8.4mm]
Polar Pattern
MZH 3040
[18.8mm]
Installed Sound
3.78"
[96.0mm]
"
.39
[9.9mm]
1.95"
15.47"
[49.5mm]
[392.9mm]
2.96"
10.56"
[75.2mm]
[268.2mm]
Ø.74"
ME36
MZH3040
MZS31
MZT30
Lobar patterned mini shotgun condenser microphone capsule.
Provides added "reach" in miking applications.
Technical Data
Acoustic operating principle
Pick-up pattern
Frequency response
Ø.26"
Sensitivity (free field, no load) @1kHz 18 mV/Pa
[6.6mm]
Electrical impedance
Min. terminating impedance
Equivalent noise level
Power supply
Dimensions
Weight
Connector
Frequency Response Graph
The MZH 3040 is a metal gooseneck for use with the ME 34,
ME 35 and ME 36 microphone capsules and is 40 cm (15.75") in
length. It features a rugged anti-reflective matte black coating
and uses a balanced floating XLR-3 connector with standard
Ø.32"
polarity.
[8.1mm]
Pressure gradient transducer/
interference tube transducer
Super-cardioid/lobar
40–20,000 Hz
50 Ω
1 KΩ
26 dB-A
37 dB-CCIR
P 12–P 48
.322" x 3.78" (8.178mm x 96.01mm)
.6 oz
XLR-3
i40-L