Adjusting The Microphone Sensitivity; Switching Between Mono And Stereo Mode - Sennheiser HMEC 250 - 05-10 Instruction Manual

Adjusting the microphone sensitivity

The microphone sensitivity has been factory preset to
80 mV/Pa.
To change the input sensitivity of the microphone:
Use a suitable slotted screwdriver.
Turn the microphone sensitivity control

Switching between mono and stereo mode

The mono/stereo switch
mono and stereo mode, depending on the intercom system.
Set the mono/stereo switch
– mono
– stereo
as shown.
allows you to switch between
to the desired position:
11