Advanced Features For Video And D.s.c - THOMSON VMD10 User Manual

24
EN
SNAPSHOT Button
Recording
Start/Stop
Button
RECORDING
Power Switch
Lock Button
PS
Shooting Mode Dial

Advanced Features For Video And D.S.C.

Progressive Mode Recording
This mode lets you record moving images (successive
jitter-free still images) onto a tape. Images can then played
back jitter-free, with superior quality. High-resolution still
images can also be processed on a personal computer or
can be printed out (
1
Set the Shooting Mode Dial to "PS", then set the
Power Switch to "
the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
To start Progressive Mode Recording, press the
Recording Start/Stop Button.
To End Progressive Mode Recording . . .
.... press the Recording Start/Stop Button. The camcorder
enters the Record-Standby mode.
NOTES:
When an image recorded using the Progressive Mode is
played back, the image may not look natural.
When the Shooting Mode Dial is set to "PS", Picture
Wipe/Dissolve ( pg. 38) and some Programme AE
with special effects (
If SNAPSHOT is pressed in the PS mode, a snapshot will
be recorded with higher quality than in VIDEO mode.
However, "MULTI-4" and "MULTI-9" cannot be used
( pg. 19).
pg. 61).
" or " " while pressing down
pg. 40) cannot be used.