Table of Contents
Advertisement
04_ETC_310_EN1
13/07/05
Remote control
Manual programming
This method consists of manually searching for the codes allowing your other devices to be controlled.
1.
Turn on the device that you wish to control.
2.
Press the corresponding key on the remote control, and while holding it down, enter one of the codes that corresponds
to the manufacturer of the device (list of brand codes are found at the end of this document). If the light or keys flash, you
have entered an incorrect code or the programming is not possible.
3.
Point the remote control at the device and press the corresponding key
the device does not go on standby, try another code.
EN
Depending on the year of manufacture and the type of device, certain functions
may not be available. Certain codes may cover more functions than others.Test the
functions that operate and possibly try other codes if necessary. Note down the
code or codes that are most suited.
When you change the batteries in your remote control, remember to program it again.
Programming the volume adjustment function
If you program the remote control of the television set to control other devices and they are connected to an amplifier, you
can also program the remote control to adjust the volume when you use one of these devices.The following description is an
example of programming a DVD player.
1.
Program the AMP key of the remote control to control the amplifier (see page 4).
2.
Point the remote control well away from the devices. Press on the
relevant mode key ( DVD , in this example), then press the AMP . Release the
3.
Turn on the amplifier, then the DVD player.
4.
Put the remote control in DVD mode, play a disc and adjust the volume using the
Do the same thing for the other devices.
To cancel the programming of all modes, press the
keys.
11:50
Page 6
(Noir/Process Black film)
VCR
DVD
(
,
-
key and while holding it down, press on the
-
-
key and while holding it down, key in the code 000 using the numeric
6
, etc.). Press the standby key
VCR
AUX
DVD
AMP
SAT
key.
keys.
+/-
. If
Advertisement
Table of Contents
