Setting Up Wired Networks; Option 4: Dhcp Method - Sony SA-NS310 Operating Instructions Manual

3
Tap [Wi-Fi].
4
Tap
[Sony_Wireless_Audio_Setup]
on the network list.
5
Access the [Sony Network
Device Setting] screen.
Start the browser (Safari) and input either
of the following URLs into the browser's
address bar.
6
Repeat steps 5 to 9 of
"Option 3-1."
After restarting the unit, confirm the
wireless settings of iPhone/iPad/iPod
touch restore.
Setting Up Wired
Networks

Option 4: DHCP method

Usually, the DHCP setting is set to ON when
you connect your computer to the network.
Try the following method if you are using a
wired network.
Set the DHCP setting of your computer to ON
in advance.
1
Check whether your computer
and router are turned on.
2
Connect the unit and the router
using a network (LAN) cable
(not supplied).
3
Connect the router and your
computer using a second
network (LAN) cable (not
supplied).
Network (LAN) cable
(not supplied)
Network
(LAN) cable
(not supplied)
4
Turn the unit on.
The LINK indicator lights up in amber
when the connection is made.
19 GB