Deactivating The Buttons On The Unit; Controlling Your Tv With The Supplied Remote; Changing The Brightness Of The Front Panel Display And Power Indicator; Saving Power In Standby Mode - Sony BDV-T79 Operating Instructions Manual

Blu-ray disc/dvd home theatre system
Hide thumbs Also See for BDV-T79:
Table of Contents

Advertisement

Deactivating the Buttons
on the Unit
(Child Lock)
You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
Press x on the unit for more than 5
seconds.
"LOCKED" appears in the front panel display.
The child lock function is activated and the
buttons on the unit are locked. (You can operate
the system by using the remote.)
To cancel, press x for more than 5 seconds so
that "UNLOCK" appears in the front panel
display.
• When you operate the buttons on the unit while the
child lock function is on, "LOCKED" flashes in the
front panel display.
Controlling Your TV with
the Supplied Remote
By adjusting the remote signal, you can control
your TV with the supplied remote.
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
Preparing the remote for
controlling the TV
Press and hold TV "/1 while entering your
TV's manufacturer's code (see the table)
using the number buttons. Then release TV
"/1.
If the setting is unsuccessful, the currently
registered code is not changed. Re-enter the
code number.
38
US
Code numbers of controllable
TVs
If more than one code number is listed, try
entering them one at a time until you find the
code that works with your TV.
Manufacturer
Code number
SONY
01 (default)
LG
02
PANASONIC
05
SAMSUNG
02, 06
SHARP
03
TOSHIBA
04
VIZIO
07
Changing the Brightness
of the Front Panel
Display and Power
Indicator
Press DIMMER.
Each time you press DIMMER, the brightness of
the front panel display and power indicator is
changed.
Saving Power in Standby
Mode
Check that the following settings are both made:
– [Control for HDMI] in [HDMI Settings] is set
to [Off] (page 46).
– [Quick Start Mode] is set to [Off] (page 46).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdv-n790w

Table of Contents