Table of Contents
Advertisement
Disassembly and Reassembly for replacement
The product's composition may vary depending on the country, region, or carrier.
Before disassembling:
Unplug and turn off device before disassembling.
•
Remove the SIM card tray from the device.
•
Wear an anti-static wrist strap and connect it to the grounded ESD safe mat.
•
Before reassembling:
Remove the adhesive tape residues perfectly.
•
Prepare all existing screws of this device and adhesive tapes.
•
Wear an anti-static wrist strap and connect it to the grounded ESD safe mat.
•
Leaving screws inside the device may damage internal components, such as the
•
battery. When assembling, be extra careful not to leave any unassembled screws
inside the device.
For all cases of broken glass:
1
Wear safety goggles and cut-resistant gloves.
2
Remove the release film of the acrylic protective cover.
3
To prevent injuries and scattering caused by broken glass, attach an acrylic protective
cover.
If your device's glass breaks, be careful not to injure your hands or other body parts
on debris.
Disassembly and Assembly
55
Advertisement
Table of Contents
