Table of Contents
Advertisement
10
Loosen three screws holding the bottom hinge
(save the hinge for eventual subsequent door
swing change). On the opposite side affi x the
attached bottom hinge. Plug the holes left after
the replacement with relevant pegs.
8. Repeat the procedure 3 and 4 on the bottom
door. In case there is no bottom door limit peg,
transfer the bearing (G) and washer to the
opposite side of the door.
9. Proceed with the assembly procedure in opposite
sequence.
Remark:
•
At OLD TIMER appliances (in the model marking
...O...) alteration of door opening direction is not
possible.
Hide quick links:
Advertisement
Table of Contents
