Table 9. System board connector and cable guide (continued)
N-
Connector/feature
o.
11
NFC cable connector (internal)*
12
Coin-cell battery connector
(internal)
13
ThinkPad Pen Pro charger
connector (internal) (for ThinkPad
L13 2-in-1 Gen 5 only)
14
HDMI connector (external)
15
Always on USB 3.2 connector Gen
1 (external)
16
Sensor board connector (internal)
(for ThinkPad L13 2-in-1 Gen 5
only)
17
Fingerprint reader connector
(internal)*
18
World facing camera connector
(internal) (for ThinkPad L13 2-in-1
Gen 5 only)
19
Nano-SIM-card slot (external) *
20
USB-C (3.2 Gen 2) power
connector (external)
21
Keyboard connectors (internal)
22
23
USB-C (3.2 Gen 2) connector
(external)
* for selceted models
Looking up FRU information
For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to:
https://support.lenovo.com/partslookup
54
ThinkPad L13 Gen 5,ThinkPad L13 2-in-1 Gen 5 and ThinkPad S2 Gen 9 Hardware Maintenance Manual
Internal cable required
NFC cable
Coin-cell battery cable
No
No
No
Sensor board connector cable
Fingerprint reader cable
World facing camera cable
No
Power cord
Keyboard assembly cables
No
Cable connection
Connect one end to the NFC
module and the other end to this
connector.
The coin-cell battery comes with
cable. Connect the cable to this
connector.
The ThinkPad Pen Pro charger
comes with cable. Connect the
cable to this connector.
Connect a compatible digital audio
device or video monitor to this
connector.
Connect USB 3.2-compatible
devices to this connector.
Connect one end to the sensor
board and the other end to this
connector.
Connect one end to the fingerprint
reader connector on the fingerprint
reader and the other end to this
connector.
The world facing camera comes
with the cable. Connect the cable
to this connector.
Insert the Nano-SIM-card tray into
this slot.
Connect the power cord to this
connector.
The keyboard assembly comes
with the cables. Connect the cables
to these connectors.
Connect USB-C compatible
devices to this connector.