Table of Contents
Advertisement
2 2 / USING YOUR APPLIANCE
DESCRIPTION OF THE
• •
CONTROLS
A
C
A
Start/stop buttons.
B
Timer / power setting.
C
Timer button.
• •
OPERATION
Press the start/stop button for the cooking
zone you want to use. A flashing 0 0 display
and a beep indicates that the cooking zone is
on. A fixed dot appears in the selected dis-
play. You can now choose the desired power
level.
If you do not select a power level, the cooking
zone will automatically switch off.
• •
STOP
Hold down the start/stop button for the coo-
king zone used.
• •
ADJUSTING THE POWER LEVEL
Slide your finger on the control in a clockwise
direction to increase your power level from 1
to P (maximum power) and in the anti-clock-
wise to reduce it
Direct access to power: press the central part
: 1press ->P P , 2 presses ->6 6 , 3 presses ->
3 3 , , and 4 presses—>P P . .
When it is switched on you can move directly
to maximum power "P" by pressing the "
button.
Tip
You can
adjust the the
power setting and
timer 1 by 1 with
each press on the
right or left part of
the circular part.
B
- - 1 1
+ + 1 1
SETTING THE TIMER
• •
There is a rotating timer for each cooking
zone. The 4 timers can be used together.
By pressing the button
select the cooking zone to which you wish to
apply the timer.
The timer leds can only be set for zones that
are in operation. The led of the timer being
displayed will be highlighted.
To use the timer:
- Switch on the cooking zone and adjust the
power level.
- Select the timer led of the cooking zone.
- Slide your finger on the circular part until you
have the desired setting for your cooking
time. For long times, turn the dial anti-clock-
wise to get to 99 minutes more quickly.
The timer starts counting only if the cooking
zone is covered with an item of cookware.
When the cooking is finished the zone swit-
ches off, the timer indicates 0 0 , and you are
notified by a s s o o u u n n d d s s i i g g n n a a l l .
- Press any button to stop the beeping.
To change the timer settings:
- Select your timer
- Turn it towards the + or the - on the circular
part.
To stop the timer:
- Select your timer
- -
- Hold down the button
"
To access the timer directly:
- Press the button
in 10-minute increments.
9
EN
repeatedly you can
.
and the setting is made
Advertisement
Table of Contents
