Setting Up; Scan For Channels - Luxor TUTV2500 User Manual

Setting Up

from the MAiN MeNU, press 4 or select Set-Up.
Use the Up and DowN buttons to highlight the sub-menu you wish to enter and press the oK
button, or press the number button that is associated with the sub-menu.
if you have trouble scanning for channels or with any aspect of the installation, refer to page 10
for more information or check the Troubleshooting guide in this manual.

Scan for Channels

You will have performed this option
automatically as part of the installation process,
but if for any reason you wish to re-scan for new
channels (if you have moved or have a new aerial
for example), make sure that all the connections
to your DTR are connected correctly. press the
gReeN button to start the automatic search for
available channels.
once the scan has started you can cancel it by
pressing the ReD button.
You can monitor the progress of the search as your DTR first searches for digital broadcast
frequencies and then for specific programmes on those frequencies. finally your DTR will
attempt to acquire the Top Up TV Anytime service.
when the scan is complete, the text at the bottom of the screen will say 'Scan complete' and the
gReeN button will re-appear to enable you to re-scan if required. To exit this menu option, press
the BACK button.
24