Inserting Batteries; Using Dtr Remote; Controlling Tv Set; Remote Control - Luxor TUTV2500 User Manual

Remote Control

inserting the batteries
Using your DTR Remote to control your TV
The DTR remote control is capable of controlling the common functions of your TV. Locate
the "Remote control TV set-up codes" sheet from your accessories and find your make of TV
on the list. Note the four digit number(s) applicable to your TV. on the DTR remote press TV,
now press and hold oK and AV together. The TV button will flash twice. Now enter the 4
digit code relating to your make of TV. Again the TV button will flash twice. if an invalid code
is entered, the TV button will only flash one long flash.
Make sure that the entered code is the right one for your TV by
pressing the 'active' buttons from the list below. if your TV does
not respond, repeat the sequence with the next available code
in the table. once you are sure that the code is correct you can
write it down in the box to the right and on an identical label on
the inside battery door of your DTR remote control.
Controlling your TV set
TV
Vol. +/-
Ch +/-
AV
0 to 9
TeXT
'play' button
Colour buttons
insert the batteries into the handset as shown. point the remote
control at the DTR and press the DTR button. The DTR button
will flash once to confirm that the remote control is working
correctly.
important information regarding the batteries
Do not mix different types of batteries or new and old batteries.
Do not use re-chargeable batteries. Do not throw batteries into
a fire, do not recharge them. Remove the batteries from the
remote control if you are not going to use it for several weeks.
immediately remove any leaking batteries. Take care in doing
this, as leaking batteries may cause burns to the skin or other
physical injury.
please respect the environment and prevailing regulations.
Before you dispose of batteries ask your dealer whether they
are subject to special recycling and if they accept them back.
Sets the remote control unit in TV mode (by pressing once)
and enables you then to control your TV set.
Switches the TV set on or off.
TV volume control.
Switches sound off or on again.
Switches channel or selects an AV socket.
Selects an AV socket.
Change channel or enters digital values.
Access Teletext pages (on / off).
Access Teletext pages (off).
enables you to use the Teletext function on TV sets.
37