3-5.
TG2 ROLLER,
FE HEAD
ASSEMBLY
(Fig. 3-5)
1)
Remove claw @ to pull out TG2 roller ©.
2)
Remove screw @) to pull out FE head assembly.
[Note on Mounting]
+ Keep clean the surface contacts tape of TG2 roller ©.
@ Screw (3 x )—O
ie @® TG2 roller
Fig. 3-5
After siding, check claw
locks FE head.
FE head
FEH holder
Slide FE head onto
FEH holder.
Fig. A