Smeg PL647GSA Instruction Manual page 18

END OF PROGRAM
At the end of the program the beeper sounds briefly and the program
lights 4 and 5 (marked "end") flash.
INTERRUPTION A PROGRAM
To interrupt a program in progress:
press the START/PAUSE button (2); the light of the program in
progress remains on (confirmation beep);
you may now restart the program by pressing button (2) again until it
restarts, or change or annul the program (see "C
PROGRAM
CHANGING A PROGRAM
To change the running program it is necessary:
to interrupt the running program (see "I
select the new program;
start the program (see "S
ANNULLING A PROGRAM
To annul the program, keep the START/PAUSE button (2) pressed until
the program is interrupted (light on and confirmation beep).
Press button (2) again and keep it
pressed until the lights 4 and 5 (marked
"end") come on.
The water in the tank will be pumped out and the program will end at the
point where it was interrupted.
16
User instructions
", or "A
NNULLING A PROGRAM
TARTING THE PROGRAM
").
NTERRUPTION A PROGRAM
").
HANGING A
");