PATENTED
SELF-CLOSING HINGE
HINGE MOUNTING:
The hinge should be mounted as shown. The leaves should
be positioned on the outside surface of the posts when the
gate is closed. For C2H121NB hinges, make sure the tabs
for the upper and lower hinges are aligned with each other.
The top surface of the upper hinge should be mounted
within 6" of the top surface of the top rail and the bottom
surface of the lower hinge should be mounted within 6" of
the lower surface of the lower rail (Fig. 2). In applications
where additional hinges are used, they should be evenly
spaced between the upper and lower hinges.
6" MAX
nationwideindustries.com | Info@nationwideindustries.com | 813-988-2628
C2H120NB & C2H121NB
Adjustment Cam
Gate Post
Fig. 1
Fig. 2
SPRING TENSION ADJUSTMENT AND MAINTENANCE
1. Insert Allen Wrench into the cam at the end of the
hinge barrel.
2. Rotate the cam clockwise to increase spring tension.
To decrease spring tension, press the wrench
downward, pushing the cam into the barrel, and rotate
the cam counter-clockwise. Adjust one hinge at a time
in quarter-turn increments.
FENCE PRO'S
#1 CHOICE
SCAN FOR MORE
INFORMATION
Fig. 3
-
+
+
-
Fig. 4
C2H120NB/C2H121NB