Table of Contents
Advertisement
Self-timer ( _ ) / Right button
[] Motion Timer
Pressing the Shuter button after
Blink (1 second interval)
setting the Motion Timer
Detecting the subject's movement
Blink (0.25 second interval)
Turn on and the image is taken
No movement is detected
after 2 seconds
MENU / OK button
[] MENU button
- When you press the MENU button, a menu related to each
camera mode will be displayed on the LCD monitor. Pressing it
again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu
available when the voice recording function is selected.
[] The Motion Timer flows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer -+ Pressing the Shutter button -e
Confirming the composition (Within 6 sec.) *_-e Starting the
detection (Swing your hands fully) 2 --). Stopping the detection
(Do not move) -+ Taking an image (after 2 sec.)
• 1:The cameradetectsthe subject'smovement6 secondsafterpressingthe
Shtterbutton,so confirmthe composition within6 seconds.
• 2: Moveyourbodyor handsfully.
]in
the following cases, the Motion Timer may not operate.
® The focus distance is over 3m.
The detection rangeof
® The exposure is too bright or dark
MotionTimer
® in backlight conditions.
® The movement is insignificant
® The movement is detected beyond
the center part (50%) of the sensor
where the movement is recognized.
® If the camera doesn't sense any
movement for 30 seconds, or the
camera doesn't sense stillness
after sensing movement
32
]Pressing theMENU button]
]Menu off]
]Menu on]
[] OK button
- When the menu is displayed on the LCD monitor, this button is
used for shifting the cursor to the sub menu or for confirming data.
Advertisement
Table of Contents
