Using The Camera Buttons To Set The Camera; Power Button; Shutter Button Setup; Zoom Wit Button - Samsung BL103 User Manual

Table of Contents

Advertisement

Using the camera buttons to set the camera
The recording mode function can be set up by using the camera buttons.
POWER button
Used for turning the camera's power on / off.
If there is no operation during the specified
time, the camera's power wilt be turned off
automatically
to save battery life.
Refer to page 50 for more information
about the auto power off function.
SHUTTER button
Used for taking an image or recording voice in the RECORDING
mode.
• In MOVIE CLIP mode
Pressing the shutter button down fully
starts the process for recording a movie
clip. Press the shutter button once and
the movie clip is recorded for as tong
as the available recording time in the
memory allows. If you wish to stop recording, press the shutter
button again.
• In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus
and checks the condition of the flash. Pressing the shutter button
down fully takes and stores the image. If you select voice memo
recording, the recording will start after the camera has finished
storing the image data.
ZOOM WIT button
If the menu is not displayed, this button
works as the OPTICAL ZOOM or
DIGITAL ZOOM button.
This camera has a 3X optical zoom and
a 5X digital zoom function. Using both
will offer a total zoom ratio of 15X.
[] TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button. This wilt
zoom into the subject i.e. the subject will
appear nearer.
Digital zoom TELE
: When the maximum (3X) optical zoom
is selected, pressing the ZOOM T button
activates the digital zoom software.
T
O,
Releasing ZOOM T button stops the digital
W
[]
zooming at the required setting. Once the
maximum digital zoom (5X) is achieved,
pressing the ZOOM T button will have no
effect.
[WIDE zoom]
[TELE zoom]
[Digital zoom 5.0X]
23

Advertisement

Table of Contents
loading

Table of Contents