Installing The Appliance; Before Starting; Tools Required - Miele KF 2802 Vi Operating And Installation Instructions

Installation

Installing the appliance

Before starting ...
It is essential to read these operating
and installation instructions carefully
before starting to install the
appliance.
The refrigeration appliance should be
installed by a suitably qualified
installer in accordance with these
operating and installation
instructions. Safe operation of the
appliance is only assured if it has
been installed and connected in
accordance with these operating and
installation instructions.

Risk of damage and injury due to
the refrigeration appliance tipping
over.
This refrigeration appliance is very
heavy and can tip forwards when the
appliance door(s) is (are) open.
Keep the appliance door(s) shut until
the refrigeration appliance has been
built in and secured in its installation
niche in accordance with these
operating and installation
instructions.
The appliance is both large and
heavy. Installation must be carried
out by two people.
24

Tools required

- Cordless drill
- TX 20 screwdriver
- Hammer drill
- Drill bits in various sizes,
depending on materials
- Hammer
- Open spanner
- Ratchet wrench, attachment: socket,
8 mm
- Adhesive tape
- Utility knife
- Pipe wrench
- Spirit level
- Tape measure
- Pencil
Other
- Step ladder
- Sack truck