Table of Contents
Advertisement
Before installing the appliance
Before installation, remove the bag of
installation and other accessories
from the appliance and remove the
profile strip from the outer appliance
door.
Remove the cord clips from the back
of the appliance.
Prepare the water connection for the
appliance (see "Water connection").
To protect the floor when installing
the appliance, secure an off-cut of
flooring or similar material to the floor
in front of the installation area.
The appliance is very heavy.
Keep the appliance doors shut until
the appliance has been fitted and se-
cured in accordance with these op-
erating and installation instructions.
The appliance is both large and
heavy. Installation must be carried
out by two people.
Load-bearing capacity of the niche
floor
The floor of the space where the appli-
ance is to be installed must be flat and
level.
It must be made of strong, rigid mate-
rial.
The appliance is extremely heavy when
fully loaded, and that the floor it stands
on must be able to bear its weight. If
necessary, seek the advice of an archi-
tect or structural engineer.
Checking the installation niche
Check the installation dimensions
(see "Installation – Installation dimen-
sions").
Check the position of the electrical
connection.
The electrical socket must not be
concealed behind the appliance and
must be easily accessible in an
emergency.
Check the position of the plumbed
water connection.
The water supply must not be con-
cealed behind the appliance and
must be easily accessible in an
emergency.
Installation
29
Advertisement
Table of Contents
