Attaching The Slide Rails To The Rack - H3C S6850-56HF-CP Manual

Figure2-17 Attaching a grounding cable that has a single-hole lug to the grounding point
Figure2-18 Attaching a grounding cable that has a dual-hole lug to the grounding point

Attaching the slide rails to the rack

1. Identify the planned slide rail installation position in the rack.
Plan a 1U rack space for installation of 1U slide rails.
space.
In a standard 1U rack space, there are three installation holes, one in the middle for auxiliary
installation and one at either end for standard installation. The spacing between two adjacent
standard installation holes is slightly smaller than the distance between a standard installation
hole and the middle, auxiliary installation hole.
Figure2-19 1U rack space
Figure2-19
2-10
shows a standard 1U rack