Replacing The Fan Assembly - Gigabyte R283-S95-AAH1 User Manual
Rack server - 4th/5th gen intel xeon scalable 2u dp 12+2-bay sata/sas lite (aah1), dual 1300w 80 plus titanium redundant power supply(aah1), 2u dp 12+2-bay nvme/sata/sas lite (aav1), 1+1 1600w 80 plus titanium redundant power supplies (aav1)
Table of Contents
Advertisement
3-9
Replacing the Fan Assembly
• Voltages can be present within the server whenever an AC power source is connected. This
voltage is present even when the main power switch is in the off position. Ensure that the
system is powered-down and all power sources have been disconnected from the server prior to
replacing a system fan.
Failure to observe these warnings could result in personal injury or damage to equipment.
Follow these instructions to replace a fan assembly:
1.
Flip the latches on the top of the fan outwards.
2.
Using the latches, lift up the fan assembly from the chassis.
3.
Reverse the previous steps to install the replacement fan assembly.
System Hardware Installation
- 41 -
1
2
Advertisement
Table of Contents
