Care And Cleaning Of Your Water Conditioner - Culligan Iron-Cleer Owner's Manual

Following these simple precautions will help assure continued trouble-free service and keep your
Culligan Water Conditioner looking like new for years.
1
Use only mild soap and warm water when cleaning the exterior of the conditioner. Never use
harsh, abrasive cleaning compounds or those which contain acid, such as vinegar, bleach and
similar products.
2
Important: Protect your water conditioner and the entire drainline from freezing temperatures.
DANGER! If your unit should freeze, do not attempt to disassemble it. Call your Culligan
Dealer.
3
Important: Culligan water filters are sold for use on potable water, only. If at any time the water
becomes contaminated, such as during a "boil water" situation, the operation of the water filter
should be discontinued until it is verified that the water is again potable. To do this, screw the
blue knob on the back of the water filter against the barrel of the bypass valve. Then, call your
Culligan dealer to have your system sanitized before it is placed back into service.
Note: Following the manufacturer's instructions regarding operation, maintenance and
re­place­me­nt re­quire­me­nts, including re­place­me­nt of filte­rs if applicable­, is e­sse­ntial for
Culligan's products to perform as advertised.
4
Should service, adjustment or trouble-shooting information be needed which is not covered in
the Use and Care Guide, call your Culligan Dealer.
If you have further questions, please call your local independently operated Culligan dealer. He or
she will be glad to be of assistance to you.
Care and
Cleaning of
Your Water
Conditioner
11