Table of Contents
Advertisement
9. BEFORE YOU CALL AN ENGINEER
Problem
Possible cause
The set does not respond to any button
being pressed
Remote control does not operate
No playback on video recorder
No TV reception
* No power supply
* The power switch on the side panel is switched
off.
* A programmed recording is currently being made
* Technical disturbance: disconnect from the mains
for 30 seconds, then re-connect. If this does not have
any effect, you can: 1. Disconnect from mains.
2. Re-connect to mains whilst holding down the
I
04 SPEED"! I
SPEED H>
lanri I PROGRAMME - I
buttons on the set. All stored data will be reset
(cleared).
* Batteries are exhausted
* Interference from fluorescent lights or bright
sunlight
* No recording on the cassette
* The aerial is not connected
* No TV channels have been stored
Automatic channel search does not store
* Not enough memory - limited to 60 TV stations,
additonal TV stations.
Delete all or some TV stations before starting anew.
Read the note in section 'Automatic channel search'
and step ©in section 'Allocating channel numbers'.
Poor playback from video recorder
* Use I
tracking E3
I
with
cassettes recorded on
another set
* Cassette badly worn or of poor quality
* Video heads dirty. Load - play briefly - remove a
cassette several times. This activates the head
cleaning function
Video recorder will not record
* TV channel not stored or wrongly selected
* Cassette with erase protection has been loaded
Programmed recording does not function
* Time data wrongly programmed
* Time/date not set properly
* A cassette with erase protection has been loaded
29
Advertisement
Table of Contents
