Table of Contents
Advertisement
3. STORING TV CHANNELS
REPEAT PLAY
OSD MODE
CLOCK SET UP
TUNER SET UP
AW
- SELECT
OK - CONFIRM
AUTOSTORE
PRESET ALLOCATION
MANUAL TUNING
AW
- SELECT
OK - CONFIRM
To be able to watch and record TV programmes you
must first store all the TV channels (e.g.: 'BBC 1') in the
set.
You can store up to 60 TV channels.
Automatic channel search
The set will search for all TV channels at the same time.
It stores them in its memory in the order in which it
finds them.
O Switch on the set with the I stoQ button.
O
Press
the I menu!
button on the remote control. The
main menu appears on the TV screen.
O
Select the line TUNER SET UP' with the I P + ...-f.land
IP - ▼
I
buttons.
Confirm it with the
I.Q.K .1
button.
O
Select the line 'AUTOSTORE' and confirm it with the
I OK Ihnttnn.
The automatic channel search function starts.
G The TV channel search will be completed in a few
minutes. Then all the TV channels will have been
stored.
Note:
* If you activate the search function again, the
newly-found TV channels will be added at the end
of those already stored (i.e.: any TV channels
already in memory are still there).
* When you activate the 'Automatic channel search'
function, any TIMER blocks which have been
programmed will be cleared.
* If you want to delete all the TV channels that have
been stored until now, you must start the search
function. Then press the I clear!] button for a few
seconds.
10
£)
Advertisement
Table of Contents
