Disassembly For Repair; How To Disassemble - Kenwood DP-7050 Service Manual

DP-7050
DISASSEMBLY FOR REPAIR
1. How to Disassemble
Push power switch to ON (@).
Push open switch and slide the tray outwards
(@).
3. Remove the tray panel { @).
hi
4. Disconnect connector CN2 (@).
5. Disconnect 3 connectors (@ ).
6. Remove 4 screws ( @) and mechanism ass'y.
Remove 3 screws (@).
Disconnect flexible pcb CN1 (@ ).
Disconnect 2 connectors (@ ).
0. Remove pcb board from 10 unit holders (® ).
= 0 ON