Advertisement
1. HOW TO REMOVE THE TRAYS.
1. Push the on / standby key.
2. Push the open / close key (DISC 1).
3. Remove the left tray panel.
4. Push the open / close key (DISC 2).
5. Remove the right tray panel.
6. Push the open / close key (DISC 2).
7. Turn the AC power off.
8. Remove 5 screws
(1) and front panel.
9. Turn the tray drive gear to clockwise (2) to remove right
tray.
10. Remove the hook (3) and then pull out the right tray.
11. Turn the tray drive gear to counterclockwise (4).
(Pickup down (5) î CD mecha moves (6) î Pickup up
î Left tray comes out (7))
12. Remove the hook (same as 3) and then pull out the left
tray.
2. HOW TO REMOVE THE CD MECHANISM HOLDER
1. Remove 3 screws (1).
2. Remove the clamper guide to arrow mark (2).
3. To down the CD mechanism holder, set the slider to arrow
mark (4) by turning the tray drive gear (5).
4. Remove the CD mechanism holder to arrow mark (3).
3. HOW TO MOUNT THE CD MECHANISM HOLDER
1. Set the slider to arrow mark (4) by turning the tray drive
gear (5).
2. Inset the CD mechanism holder into the hole of slider (6).
4. HOW TO MOUNT THE TRAYS.
1. Mount the clamper guide (1).
2. Fix 3 screws (2).
3. Set the slider to arrow mark (A, B) by turning the tray
drive gear.
4. Insert the tray (A) to guide (B) on slider (3).
5. Turning the tray drive gear to clockwise (4) set the slider
to arrow mark (C).
6. Insert the tray (B) to guide (C) on slider (5).
5. HOW TO REPLACE THE PICKUP
1. Remove 4 screws (1) and turn over the CD mechanism
assy.
Short the short-land of the pickup before the following pro-
cedures (2)
2. Remove 3 connectors (3) and 3 screws (4).
3. Remove the disc motor ass'y (5).
4. Remove washer and gear (6).
5. Remove 2 screws (7) and rod (8).
6. Remove the pickup ass'y (9).
Note : When mounting the pickup, in the reverse order of dis-
assembly. Unsolder the short land after connecting
the connectors.
DISASSEMBLY FOR REPAIR
5
7
4
2
Fig.1
1
CLAMPER
GUIDE
1
2
5
B
A
3
TRAY(A)
TRAY(B)
Fig.3
4
4
4
3
5
3
D-W320V
6
1
1
x4
3
2
1
CD MECHANISM HOLDER
(SUB CHASSIS)
3
6
4
SLIDER
CHASSIS
Fig.2
2
2
2
1
4
5
C
short-land
2
9
7
8
7
6
DRIVE GEAR
(DISC MOTOR A`ssy)
1
x4
Fig.4
3
Advertisement
