Table of Contents
Advertisement
Chapter 3
Note: During the restoring process, do not turn off or reset the extender.
To reset the extender to factory default settings:
1
In the
Factory Default Restore
2
Wait a few minutes for the resetting and rebooting.
Note:
1. During the resetting process, do not turn off the extender.
2. We strongly recommend you back up the current configuration settings before resetting the extender.
3 11 7
Change Login Password
The account management feature allows you to change your login password of the web
management page.
1
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in
with the password you set for the extender.
2
Go to
System
>
Change Login
3
Enter the old password, then a new password twice (both case-sensitive). Click
SAVE.
Note:
1. The new password must be 6-32 characters long and not include any spacing.
4
Use the new password for future logins.
3 11 8
System Log
When the extender does not work properly, you can save the system log and send it to
the technical support for troubleshooting.
Follow the steps below to save the system log:
Configuring via Web Management Interface
section, click
FACTORY
Password.
RESTORE.
31
Advertisement
Table of Contents
