Return Section.4 - Yamaha MC2410M Operating Manual

RETURN SECTION
(D Return assign switches
Pressing a return in assign switch will send the return
input signal to the correspondingly numbered output
buss.
In the case of an echo unit connected to the return input,
this would allow any or all of the players to have echo in
their monitor mix.
© RETURN level control
This control is used to set the level of the signals
received at the return inputs. Nominal level is obtained
with the control set at "A".
Again, this is useful if the return inputs are used for echo
or signal processing, when it will function as a "return"
and provide exact matching with the output level of the
effects unit you are using.
© Return CUE switch
Depressing the return CUE button mutes all group CUE
signals in the headphones, permitting the engineer's
checking of only the selected return signal, regardless of
whether a group CUE switch is on or off. Please note
that as with the input channel cue switches, engaging a
return in cue switch will cause the input CUE indicator to
light.
4