Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
20v RATCHET
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
2185C-B
2186C-B
Model 2185c-B shown.
For Best results,
use 3.0 amp Hour Battery
or Greater.
(Sold Separately)
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23c
59366 59367
Advertisement
Related Manuals for Harbor Freight Tools Bauer 2185C-B
Summary of Contents for Harbor Freight Tools Bauer 2185C-B
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Table Of Contents
table of contents Safety ..............2 Operation ..............8 Specifications ............7 Maintenance ............10 Setup ..............7 Warranty ..............12 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Safety
electrical Safety a. power tool plugs must match the outlet. e. When operating a power tool outdoors, never modify the plug in any way. Do not use use an extension cord suitable for outdoor any adapter plugs with earthed (grounded) use. - Page 4 o. The warnings, precautions, and instructions It must be understood by the operator that discussed in this instruction manual common sense and caution are factors cannot cover all possible conditions which cannot be built into this product, and situations that may occur. but must be supplied by the operator.
- Page 5 This will ensure that If unreadable or missing, contact the safety of the power tool is maintained. Harbor Freight Tools for a replacement. b. never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
- Page 6 Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged.
-
Page 7: Specifications
Specifications Model 2185c-B Model 2186c-B Bauer 20 V Li‑Ion 57007 Bauer 20 V Li‑Ion 57007 Battery Type (sold separately) (sold separately) Bauer 20 V Li‑Ion 57006 Bauer 20 V Li‑Ion 57006 Charger Type (sold separately) (sold separately) No Load Speed : 0‑225 ... -
Page 8: Operation
Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section. - Page 9 Workpiece and Work area Set up 1. Designate a work area that is clean and well lit. 2. Secure loose workpieces using a vise or clamps The work area must not allow access by children (not included) to prevent movement while working. or pets to prevent distraction and injury.
-
Page 10: Maintenance
Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment. - Page 11 troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Battery Pack not properly 1. Remove Battery Pack, make sure there are no obstructions, connected. clean battery contacts on tool, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.