Table of Contents
Advertisement
Rotisserie
Installation & Cooking
Insert the shaft of left plate
into the shaft of motor.
To Clean ROTISSERIE &
Press Start.
METAL TRAY
After cooking hold the rotisserie bar of both side with the handle and lift up
When cooking is completed,
the right end slightly and pull out from the left end.
separate the ROTISSERIE from
the food. Take care when
NOTE:
handling both ROTISSERIE &
1. The rotisserie cooking is convenient for grilling of meat and poultry.
metal tray and food stuff as it is
very hot. During cooking it is
2. The rotisserie cooking can be used in grill mode, convection mode and
normal for the ROTISSERIE &
metal tray to be stained from the
food. Simply clean the
3. The rotisserie bar is used for rotisserie cooking only. After rotisserie cooking
ROTISSERIE & metal tray with a
warm soapy water and a soft
cloth. If the ROTISSERIE & metal
CAUTION
tray remain stained after
1. DO NOT USE THE METAL TRAY AND ROTISSERIE WITH NO LOAD, IT WILL BE
washing, Utensils in hot soapy
water for a few minutes.
2. AFTER COOKING, THE METAL TRAY WILL BECOME EXTREMELY HOT.
Do not use metal scouring pads.
3. It is recommended to remove the grease from the turntable every time before
They will scratch the surface .
All the surface of the food will become even brown without overturning.
Persian Cook.
is finished remove the rotisserie bar and store with other accessories.
DAMAGED THE OVEN.
cooking. Hot grease on the turntable may cause smoke.
Put the shaft of right plate on
the holder of rotisserie.
38
Glass Tray
Metal Tray
Advertisement
Table of Contents
