Tool Kit; Spare Wheel - CITROEN C3 AIRCROSS Handbook

In the event of a breakdown

Tool kit

Set of tools supplied with the vehicle.
Accessing the tools
5 seats version
7 seats version
The tools are stored in a bag located in the
boot.
52
List of tools
1. Jack
To raise the vehicle.
2. Jack handle
3. Wheel wrench
To remove the wheel bolts.
4. Removable towing eye
For more information on Towing the vehicle
and using the removable towing eye, refer to
the corresponding section.
These tools are specific to the vehicle
and may vary according to the level of
equipment.
Do not use them for any other purpose.
The jack must only be used to change
a wheel with a damaged or punctured
tyre.
Do not use any jack other than the one
supplied with the vehicle.
If the vehicle does not have its original jack,
contact a CITROËN dealer.
The jack does not require any maintenance.

Spare wheel

Access to the spare wheel
The spare wheel is installed outside the vehicle,
under the boot, supported by a metal hanger.
Removing the spare wheel
► Open the boot.
► Clear the boot floor and lift it.
► Lift the pre-cut section of carpet to remove
the fixing winch bolt from the spare wheel.
► With the wheel wrench 3, rotate
anticlockwise and loosen the screw hook
retaining the spare wheel hanger.