Download Print this page

Smeg DI6014 Instruction Manual page 19

Advertisement

User instructions
SPREAD HALF LOAD
(available in all programs except the soak program)
When there are not many dishes to be watched, the "spread half load"
option, controlled by button (10) is useful; it saves water and electricity
and reduces the program's duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load..
EXTRA OPTIONS - "3/1" BUTTON
(available in all programs except the soak program)
Press buttons 6 + 8 (QUICK TIME PROGRAMS button + ENERSAVE
option button) simultaneously to activate the "3/1" option; the
respective light (12) comes on to confirm the selection. The option is
optimised for use of detergents which are complete with salt and rinse
aid, known on the market as "3 in 1", "triple action", etc. With this option
activated, any salt and rinse aid If you wish to use detergents which
already contain salt and rinse aid already in the dishwasher will not be
used.
N.B.: even with the "3/1" option selected, the regenerating salt/rinse aid
lights will still stay on if their containers are empty.
IMPORTANT: the option continues to be active until it is deactivated by
pressing buttons 6 + 8 simultaneously; the light (12) will then go out.
3/1 products are not suitable for use with excessively hard water.
Therefore, if the water hardness is set higher than H3, the 3/1 OPTION
light (12) flashes to indicate a setting error. This does not prevent the
use of the option, but the washing results might not be of the best.
DELAYED START
(available in all programs except the soak program)
The start of the washing program can be delayed to program the
dishwasher to operate at the preferred time of day (e.g. overnight). Press
the PROGRAM DELAY button (13) to activate the option and display (14)
a 1 hour delay. Keep pressing to select the delay required, which may be
up to 9, 12 or 24 hours depending on the model.
When the door is closed, the appliance will prewash the dishes, after
which the "program delay" set will come into effect.
17

Hide quick links:

Advertisement

loading