Table of Contents
Advertisement
PARTS, CONTROLS AND KEYS
COMMAND /KEY DEFINITION
Prono Prorforne
[PTT-A]
Use for the Transmission of specified channel while dual standby is activated on.(If the dual standby
is not activated on, it is not valid)
[PTT-B]:
Use for the Transmission of more specified channels which selected by pressing UP or DOWN key
while standby.
-SK-SIDE KEY1/ [F] :
Press the [F] button, to activate the FM Radio on; Press it again to deactivate the FM Radio.
Press and hold on the
[F] button, to activate the alarm function; Press and hold it again, to
deactivate the alarm function:
-SK-SIDE KEY2/ [M]
Press the [MJ button, to turn on the flashlight; Press it again to tun off. Press and hold on the
IM] button, to monitor the signal.
-COPYING
Connecting the two radios with special data cable, press and hold SK-SIDE KEY2/ [MJ (or numerical
key 2 or 3), then power on, youwill see ' COPYING' on the LCD, that means data is being copied
from one radio to another.
PARTS, CONTROLS AND KEYS
[FUNCTION KEYPAD ]:
-[ MENU Jkey:
To enter the menu of the radio and confirm the setting.
Press and hold
[MENU]
button, then power on, to switch the frequency mode and channel mode.
14] [¥ ]key:
Press and hold [4] or [1 key for frequency up or down fast.
Press
[a] or [W] key, the scanning will be opposite.
LEXITIAB key }
-To cancel /clear or exit.
-While standby, press
[EXIT/AB]
key to switch between Channel A and Channel B.
-Under FM radio mode, press [EXIT/AB]
key to switch the FM radio band 65-75MHz/76-108MHz.
NUMERIC KEYPAD
-Used to enter information for programming the radio's lists and the non-standard CTCSS
-Under transmission mode, press the numeric key to send the signal code( the code should be
set by PC software).
ep
[aan]
ACCESSORY JACK
The jack is used to connect audio accessories, or other accessories such as programming cable
Advertisement
Table of Contents
